You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 30
| I have installed an aftermarket Sirius radio to my 2010 Vision 8 Ball, but am unable to find the cable that goes from the radio to the antenna. It plays through the factory radio installed on the bike. The stereo was installed by a dealer prior to my purchase of the bike. The stereo has been sketchy at best as far as picking up stations and was hoping for the XM to solve the problem. The XM now transmits through the air to the factory radio but is quite fuzzy. I bought the kit to cable connect,but have been unable to find the antenna cable coming out of the factory radio. Any idea if there is in fact one. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | it is Directly INTO the radio itself. if you lift the center console(radio) its the black wire plugged into the underneathe backside of the radi0 |
|
| |
|
Cruiser
Posts: 208
Wichita, Kansas | There is also a motorcycle specific antenna which does not require the metal ground plane so it works on fiberglass vehicles. i switched to one on my corvette and it really helped.
|
|
| |
|
Puddle Jumper
Posts: 30
| Has anyone had experience with hooking into the factory stereo with an aftermarket XM? This wire you indicate, can it be spliced into? |
|
| |
|
Visionary
Posts: 4278
| landscape88 - 2012-07-15 9:25 PM Has anyone had experience with hooking into the factory stereo with an aftermarket XM? This wire you indicate, can it be spliced into? Try hooking it to the wire in the glove box that is used for ipods |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Antenna Wire
