You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




HEADLIGHTS
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
TRELL
Posted 2011-12-29 3:35 PM (#104315)
Subject: HEADLIGHTS


Cruiser

Posts: 232
Does the outer cover come off the victory vision headlight? The problem with mine is that it sweats on the inner part of clear lens and leave water spots and olook awful. Wife says i need to clean it DUH...how.
Top of the page Bottom of the page
sfalexi
Posted 2011-12-29 3:55 PM (#104316 - in reply to #104315)
Subject: Re: HEADLIGHTS


Tourer

Posts: 307
Columbia, SC
Should be a sealed piece. Anytime I've seen sweat on the inside of ANY headlight lens cover, it means something is cracked and not sealing like it should.

BTW, for clarity, actual HEADLIGHT or the third light (the centered round one, might be HID on your model, but has a switch on the console for it)?
Top of the page Bottom of the page
TRELL
Posted 2011-12-29 4:06 PM (#104319 - in reply to #104316)
Subject: Re: HEADLIGHTS


Cruiser

Posts: 232
The hid round part is the place where the water spots are.
Top of the page Bottom of the page
sfalexi
Posted 2011-12-29 5:15 PM (#104325 - in reply to #104315)
Subject: Re: HEADLIGHTS


Tourer

Posts: 307
Columbia, SC
There was a technical service bulletin on that part. I don't know what year vision you have, but my vision it got so bad that it actually half filled up with water like a fishbowl during a heavy rain and it stayed there a few days. The dealer I went to replaced it under warranty and it has been good ever since. While he waited for the warranty part to come in, he just took a drill and drilled a small hole at the bottom when it was on the sidestand. Taht was to allow any water to drain while I waited for the part. I'd check with a dealer.

Alexi
Top of the page Bottom of the page
TRELL
Posted 2011-12-29 5:56 PM (#104327 - in reply to #104325)
Subject: Re: HEADLIGHTS


Cruiser

Posts: 232
sfalexi - 2011-12-29 5:15 PM

There was a technical service bulletin on that part. I don't know what year vision you have, but my vision it got so bad that it actually half filled up with water like a fishbowl during a heavy rain and it stayed there a few days. The dealer I went to replaced it under warranty and it has been good ever since. While he waited for the warranty part to come in, he just took a drill and drilled a small hole at the bottom when it was on the sidestand. Taht was to allow any water to drain while I waited for the part. I'd check with a dealer.

Alexi
Thank you for that info. Would know where to look for that tech bulletin? I keep my bikes very clean and those spot drive me nuts.
Top of the page Bottom of the page
sfalexi
Posted 2011-12-29 6:52 PM (#104328 - in reply to #104315)
Subject: Re: HEADLIGHTS


Tourer

Posts: 307
Columbia, SC
After rechecking my thread, it looks like it's not a TSB, but just a "known issue". Here's my thread where I got that information from and laying out how the dealer I was at dealt with it...

http://www.vision-riders.com/bb/forums/thread-view.asp?tid=7932&sta...
Top of the page Bottom of the page
lennyb
Posted 2011-12-29 10:13 PM (#104340 - in reply to #104315)
Subject: Re: HEADLIGHTS


Iron Butt

Posts: 804
Perry Hall, MD
If the warranty path doesn't work there was a member who posted that they took the light apart in order to paint part of the reflector area. The post described how to heat it to release the adhesive and then how to reseal it. Sorry I can't provide better info to use for a search.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™