|
|
Iron Butt
Posts: 880
Orlando, FL | OK, I have a Vision 8 Ball so I do not have heated grips. I hate the factory grips and want to put ISO's on. But the Kuryakan Site says "Victory - All Models EXCEPT Vision". So I have no idea what model to get. I have seen Visions with the ISO's. Does anyone here know what model number grips to get? I am having a hard time getting an answer from Kuryakan and the Dealers seem to be out to lunch when it comes to aftermarket accessories and the Vision. |
|
| |
|
Visionary
Posts: 4278
| <p>The reason they say no vision is cause of the polished ends on our grips. You have to leave them off. Make sure you buy grips with the throttle sleeve in the grip. You don't want a grip for a metric bike cause there longer then ours. I would guess you want the same as what a harley uses. You don't want a grip for 2009 and up cause harley went away from cables and went to electric throttle.</p><p>Hi Max <br /></p>
Edited by john frey 2011-08-23 11:24 AM
|
|
| |
|
Puddle Jumper
Posts: 48
East Tennessee | If the part number happens to be #6241, let me know. I have a brand new set for sale. |
|
| |
|
| Have you considered Avon Grips? |
|
| |
|
Cruiser
Posts: 154
| Avon makes grips for the Vision? I have them on my Road Glide and love them |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | CorvettePoor - 2011-08-23 10:36 PM
If the part number happens to be #6241, let me know. I have a brand new set for sale.
Thanks. That's the Universal set for metric's with 7/8's" bars. As near as I can tell my 2011 has 1 inch bars. Do you have a set of ISO's on your vision? Are they #6241?
Edited by MaddMAx2u 2011-08-24 4:55 PM
|
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | Here are seven options from Arlen Ness
http://shop.arlenness.com/c-175-billet-grips.aspx |
|
| |
|
Puddle Jumper
Posts: 48
East Tennessee | MaddMAx2u - 2011-08-24 5:54 PM CorvettePoor - 2011-08-23 10:36 PM If the part number happens to be #6241, let me know. I have a brand new set for sale. Thanks. That's the Universal set for metric's with 7/8's" bars. As near as I can tell my 2011 has 1 inch bars. Do you have a set of ISO's on your vision? Are they #6241? I don't have ISO's. I bought the 6241's for an old bike. |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | Thanks Nozzle, thanks Noemtz, but I have always had ISO's and love them. I have had them on my Kawi for 7 years and 36,000 miles and they look as good as new. |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | Thanks Nozzle, thanks Noemtz, but I have always had ISO's and love them. I have had them on my Kawi for 7 years and 36,000 miles and they look as good as new. |
|
| |
|
Cruiser
Posts: 102
Parkersburg WV | Hi, my guess is they say they are not for Vision's because of the heated grips, however in the 2011 accessory catalog there are a set of Ness grips for the Vision but they are not Iso's. They do make Iso's for the Cross bikes pt# 2874838 so if the handlebar is the same size I dont know why they wouldnt work. Looks to me the difference is the ones made for the Vision are open end style.
Bob Scott
'09 Vision tour
'03 Vegas |
|
| |
|
Iron Butt
Posts: 612
| NOEMTZ - 2011-08-23 11:21 PM
Have you considered Avon Grips?
I am considering them as a heated replacement for my factory heated grips, but I'm curious if they are "plug n play" with the existing heating system, or will I need to do some surgery on the wiring ? |
|
| |
ISO Grips
