|
|
Cruiser
Posts: 100
| I want to have the console wrapped on my Vision but I'm having trouble with idea's! logo ,design, etc....Has anyone had there's done lately |
|
| |
|
Visionary
Posts: 4278
| I did the carbon fiber looks freat in the light of day or even at nigh no glare. Coast was ok to.
(IMG_0057.JPG)
Attachments
----------------
 IMG_0057.JPG (49KB - 3 downloads)
|
|
| |
|
Cruiser
Posts: 273
Midlothian, Va. | Did the same to mine. Cheap and easy mod to make the dash look nice. |
|
| |
|
Cruiser
Posts: 95
Alberta, Canada | What coast where you on John!! LOL |
|
| |
|
Visionary
Posts: 4278
| Down here in minnesota. CF handles the heat and the cold and they saThis is what I did with left overs.<br />
Edited by john frey 2011-06-13 7:35 PM
(IMG_0059.JPG)
(IMG_0060.JPG)
Attachments
----------------
IMG_0059.JPG (39KB - 3 downloads)
IMG_0060.JPG (43KB - 1 downloads)
|
|
| |
|
Puddle Jumper
Posts: 6
| john frey - 2011-06-13 4:25 PM
I did the carbon fiber looks freat in the light of day or even at nigh no glare. Coast was ok to.
What kind of material did you use, I am instrested in doing that to my vision.
thanks,
flutch |
|
| |
|
Cruiser
Posts: 52
DeRidder, LA | I did the same, going to continue with the rest of the brushed aluminum when I order some more. I used 3M vinyl, very easy to work with and a very shallow learning curve. Can't figure out how to get the cam badge off yet without jacking it all up so I can do it too. |
|
| |
|
Tourer
Posts: 324
New Orleans, La, | John where or whom did you get the material to wrap your parts? How long have you used it and how well does it hold up on the hot parts like the engine covers? This looks like a great mod for my 08 VV. |
|
| |
|
Cruiser
Posts: 206
Lumber Bridge, NC United States | go to www.3m.com |
|
| |
|
Cruiser
Posts: 152
| I went ahead and had my console dipped at H20 Graphix which is a really cool process and they have them all over. here is a video
http://youtu.be/zbm7FcKaeFs I also have a painted one I will sell but it looks better on a black or gray bike not a cherry like mine so its up for sale it is black with flames. if you ar interested drop me a line and I will send a photo
bob5219@mac.com |
|
| |
|
Visionary
Posts: 4278
| <p>I bought mine from http://www.carbonfiberfilm.com/ I did the 12x48 $30 bucks and it comes to the house very fast look for the how to videos they help. The bike sits in a unheated garage and the weather getting to 5 above didn't bother the C F a toll. Now here in a sunny day being 103 didn't bother is. I did not buy there there 3M primer I just cleaned every thing with rubbing alcohol. You need four or five new razor blade. Before you fold it around the edges make cuts with scissors every inch or two it makes it easier to fold around. I have hit the C F with a wax detailer with no discoloring. Keep in mind I said detailer. It doesn't make it shin. You'll catch on pretty quick and do the bottom part of the dash too.</p><p>If you do the wedges pull the 106 off the wedge and then re glue is on. As for the inspection cover the more heat will help mold it into place. Be carefull to much heat the C F will melt <br /></p>
Edited by john frey 2011-06-23 11:14 AM
(IMG_0056.JPG)
(IMG_0057.JPG)
Attachments
----------------
IMG_0056.JPG (44KB - 1 downloads)
IMG_0057.JPG (49KB - 0 downloads)
|
|
| |
console wrapped
