You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Tourer
Posts: 576
, IA | What is the size socket I need to buy to remove spark plugs will b using smaller size ratchet 3/8" |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | 5/8 |
|
| |
|
Tourer
Posts: 404
San Antonio, TX United States | best served with the proper plug socket and a 3 inch extension. I happen to prefer the 5/8 universal joint plug socket since i change plugs in all the victory bikes and some that people put there own custom parts on. So i can always get in with that set up. A nice set of long handled curved needle nose pliers is good for gripping the plug wire and levering against the cylinder head to pull them off cleanly with out pulling the wire out of the crimp. Of course put a rag or something soft between the needle nose pliers and the cylinder head. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | 5/8 i use the little extention its only a few inches long. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | I keep a 1/3 cut of a hose to put on the cylinder head fin to protect when using the needle nose to pull the wire. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Spark plug socket
