|
|
Puddle Jumper
Posts: 37
Coos Bay, Oregon | I wanted to share photos of a set of exhaust tips I made from parts, I found a stainless steel exhaust tip that was the same diameter as the stock tips where they bolt to the muffler and as a bonus I discovered that 3-1/2" custom exhaust tips made by many others will plug right into the stainless steel housing to give it a unique look. It also makes it easy if you want to change your look later by installing a differnet tip.
When I started this project I wanted the exhaust tips to look like the rear of a jet engine, simualr to the nozzels seen on fighter jets, I am very pleased with the results. I have about $240 involved with this build ( about the same price I paid for my Gatlins) but they came with alot of personal satisfaction that these on my Vision are different, you see I ride with Two other Visions and we look for things to make each of our bikes stand apart.
I took lots of photos of how I made them and plan to post directions with part numbers one night this next week so others can use my research. I really like the spirit of the Vision-Riders members here in sharing knowledge of things they have tried.
(P5280053.JPG)
(P5280048.JPG)
(P5280044.JPG)
Attachments
----------------
 P5280053.JPG (60KB - 4 downloads)
P5280048.JPG (44KB - 3 downloads)
P5280044.JPG (28KB - 3 downloads)
|
|
| |
|
Cruiser
Posts: 184
Allen Park, MI | Nice job...I will be looking forward to the details. Thanks for sharing. |
|
| |
|
Cruiser
Posts: 212
Tavares, Fl | Those look good, but are those bathroom plungers???? I just couldn't resist.... |
|
| |
|
Cruiser
Posts: 143
Birmingham, AL 08 MC Tour Premium 2012 Bronze Mist | Congratulations on a great job! I really like the look. |
|
| |
|
Puddle Jumper
Posts: 37
Coos Bay, Oregon | I never seen the bathroom plunger image till you mentioned it......LOL.......... but the ends were made for a Harley 
|
|
| |
|
Tourer
Posts: 537
, FL United States | Good job... Pleae share the install with us... |
|
| |
|
Cruiser
Posts: 101
Cold Lake Alberta Canada | Those are awsome, I'm not a big fan of the gatlin tips but yours are very nice. Great job.
|
|
| |
|
Cruiser
Posts: 157
| Very nice
|
|
| |
|
Tourer
Posts: 412
Fargo, ND | Nice Job...I really like em! |
|
| |
|
Tourer
Posts: 446
East TN | SWEET!!! Nice touch! |
|
| |
|
Tourer
Posts: 523
seattle, wa | I really like those, you did a great job. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | scotsvision - 2010-05-31 7:46 PM
I never seen the bathroom plunger image till you mentioned it......LOL.......... but the ends were made for a Harley
Okay, I'm not sure how to follow up on this one, are you all's mind in the toilet, or is it a pun on Harley?
I like the looks of those, I rate them up at the top without being gaudy or novelty. |
|
| |
|
Puddle Jumper
Posts: 37
Coos Bay, Oregon | I posted my photos and instructions for the fabrication of my exhaust tips on the Vision Tech Reference page, hope they are useful. I want to thank Jedi Jeff for his help and instructions while putting together my reference page, that was alot of work. Thanks again Jeff for the quick help today. Scott |
|
| |
|
Tourer
Posts: 523
seattle, wa | Scott, Thanks for taking the time to show us the procedure. They look great. |
|
| |
|
Tourer
Posts: 537
, FL United States | Thanks |
|
| |
|
Fountain Inn, SC United States | scotsvision - 2010-06-01 7:59 PM
I posted my photos and instructions for the fabrication of my exhaust tips on the Vision Tech Reference page, hope they are useful. I want to thank Jedi Jeff for his help and instructions while putting together my reference page, that was alot of work. Thanks again Jeff for the quick help today.
Scott
Scott -Great job on the Tech Reference article!!!!
Always glad to help anyone trying to pass on good info.
Everyone, be sure to check out his post.
-Jeff |
|
| |
Vision Exhaust Tips
