|
|
Visionary
Posts: 1436
| I know lots of folks get the gear lite to light up wrong or it bounces but here is my observation. Mine was getting really bad again, reading second when in first and so on, then I changed the oil. Tada instant fix! Works every time.
Now someone said it is a resistance issue with a bolt and I've heard some have replaced a switch and the bolt.... so I have to think that something is just a tad too sensative.
Regardless, no big deal and since the oil change its good as new  |
|
| |
|
Tourer
Posts: 400
| It's a grounding issue and was resolved during the 09 production, according to Vic people at the AVR back in august. It should be covered under warranty. |
|
| |
|
Cruiser
Posts: 128
Aubrey, TX | yeah I just had mine fixed under warranty..but wait till you are ready for the fluid change and you will get a free one.. |
|
| |
|
Tourer
Posts: 466
Grand Cane, LA | I find mine only does it when the bike is cold. Once it warms up, it goes back to working properly. Must have something to do with the oil thickness at start up. Doesn't really bother me as I have ridden so long without a gear shift indicator on other bikes. Long as neutral indicator works, I'm good to go. |
|
| |
|
Puddle Jumper
Posts: 47
High Ridge, Mo. | Mine only does it when I am trying to find neutral. Sometimes it says reverse or first. I'll see if oil fixes it on next change. I didn't pay attention at first change. I just learned to trust the neutral light and not the indicator. |
|
| |
|
Tourer
Posts: 363
Goldsboro, NC | Teach - 2009-11-03 8:27 PM
and the bolt.... so I have to think that something is just a tad too sensative.
Hey.... I paid extra money to have an oil life indicator on my cage.
or...
That's not a bug... its a feature! |
|
| |
|
Iron Butt
Posts: 810
| My 2008 keeps indicating 2nd gear when it is in first. I just changed my oil as well and it does the same thing.
|
|
| |
|
Visionary
Posts: 1324
So Cal | I took my primary off at 15k, oil cange time. The bolt is the same as those on the outer primary only 20mm long. I tried a standard head bolt but because of the clutch basket, could'nt get a socket on it. I put a star type lock washer on the original which helped till recently. I also used new Vic oil which I'm not happy with at all. The bike hasent shifted right since. But I was at the dealer and thought, oh well. Never again. 17.5k is comming up and I'll go back to Castrol. See if it helps. They make cap screws in that size with a hex drive head. I think it would provide more shoulder to improve contact with the washer. Now that I know whats in there I'll be better prepared next time. Contact cleaner or WD-40 at the connector helped also. |
|
| |
|
Iron Butt
Posts: 804
Perry Hall, MD | Careful, sounds like we're right on the edge of another oil thread. |
|
| |
|
Visionary
Posts: 1324
So Cal | lennyb - 2009-11-09 5:41 PM
Careful, sounds like we're right on the edge of another oil thread.
I'm convinced that any oil mentioned on this site is better than Vic oil. I would'nt have believed it if I hadn't experienced it first hand. |
|
| |
|
Cruiser
Posts: 137
Houston, Texas | Let the games begin..........again.
I'm just saying...
Edited by STARSHIP 1 2009-11-09 9:18 PM
|
|
| |
|
Cruiser
Posts: 212
Tavares, Fl | Ha Ha, I use Mobil 1 full synthetic on my 08 and have never had the gear indicator problem....... |
|
| |
|
Tourer
Posts: 562
SC, Bluffton | Is there something the Dealerships are doing to fix this? I ask because I was going to change my own oil from now on (money), but if there is something dealerships are doing, I might reconsider. I regularly have false gear readings. Does Victory post a bulletin anywhere of items Dealers are to fix, free of charge, to certain models? For instance, I know Honda puts out bulletins for Goldwing problems, but they aren't recalls. Maybe you could call them soft recalls? 
Herb
Edited by g1nomad 2010-03-05 12:55 PM
|
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Can some one please post a link to more info on this subject, mine is now doing this.. what is this bolt people are talking about? |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Hey teach, I had that gear indicator jumping from 1 to 2 at a light. So I changed my oil and it stopped! Now its working right. But yesterday all the sudden my green (N) light completely stopped working..... |
|
| |
|
Tourer
Posts: 576
, IA | drill baby drill |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Drill? |
|
| |
|
Iron Butt
Posts: 732
Western WA | Teach - 2009-11-03 4:27 PM
I know lots of folks get the gear lite to light up wrong or it bounces but here is my observation. Mine was getting really bad again, reading second when in first and so on, then I changed the oil. Tada instant fix! Works every time.
Now someone said it is a resistance issue with a bolt and I've heard some have replaced a switch and the bolt.... so I have to think that something is just a tad too sensative.
Regardless, no big deal and since the oil change its good as new
Same thing happens to me on my 2008 Teach. Undocumented feature? |
|
| |
|
Visionary
Posts: 1436
| Lol guys..... Now my fuel gage keeps reading full all the time. Too bad it isn't, would be a great feature, lol.... |
|
| |
Wrong gear lite
