You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Bushtec Vision Trailer Announcement from 07KPT at thevmc.com
Jump to page : 1 2
Now viewing page 2 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Jim
Posted 2010-03-05 10:49 AM (#54395 - in reply to #33659)
Subject: Re: Bushtec Vision Trailer Announcement from 07KPT at thevmc.com


Cruiser

Posts: 93
Saskatchewan (hard to say, easy to draw )
I spent a ton of time reasearching trailers for my Vision...http://bohica.homeip.net:591/~mark/Campers.html was the best place to look. By the way, if you got a Bushtec Vision hitch, PLEASE check the two inch cross braces at the back! BOTH of mine were improperly welded. One compleltely let go and the other was cracked. I did let Andrew at BushTec know and he said that the problem had been fixed but it didn't make me feel happy after pulling my trailer to Custer and back from Saskatchewan! Fianally got a Leeure Lite Excel burgandy and have had it painted with actual Midnight Cherry ( from Polaris) and pinstriped to match my Vision. Really happy with it all!!!
Top of the page Bottom of the page
Jim
Posted 2010-03-05 10:59 AM (#54398 - in reply to #33659)
Subject: Re: Bushtec Vision Trailer Announcement from 07KPT at thevmc.com


Cruiser

Posts: 93
Saskatchewan (hard to say, easy to draw )
I spent a ton of time reasearching trailers for my Vision...http://bohica.homeip.net:591/~mark/Campers.html was the best place to look. By the way, if you got a Bushtec Vision hitch, PLEASE check the two inch cross braces at the back! BOTH of mine were improperly welded. One compleltely let go and the other was cracked. I did let Andrew at BushTec know and he said that the problem had been fixed but it didn't make me feel happy after pulling my trailer to Custer and back from Saskatchewan! Finally got a Leeure Lite Excel burgandy and have had it painted with actual Midnight Cherry ( from Polaris) and pinstriped to match my Vision. Really happy with it all!!! By the way, sorry if this is a repost ...just trying the message board out!
Top of the page Bottom of the page
salty
Posted 2010-03-05 1:19 PM (#54408 - in reply to #33659)
Subject: Re: Bushtec Vision Trailer Announcement from 07KPT at thevmc.com


Cruiser

Posts: 99
Cold lake Alberta
Greetings from Cold Lake AB
Top of the page Bottom of the page
Jim
Posted 2010-03-05 1:44 PM (#54411 - in reply to #33659)
Subject: Re: Bushtec Vision Trailer Announcement from 07KPT at thevmc.com


Cruiser

Posts: 93
Saskatchewan (hard to say, easy to draw )
I have a Leesure Lite Excel - painted it with Polaris Midnight Cherry factory ( same paint as used with the sleds!) and decaled with line semitransparent silver to match my '08 Vision. Absolutely love it! Pics as soon as the snowback is small enough to get through to my storage shed! Looked for trailers for a long time .... best site to cross shop and compare at http://bohica.homeip.net:591/~mark/Campers.html

CAUTION! CHECK YOUR HITCH! Issues with the BUsh Tec hitch - there are 2 small ( 2" ) Z brackets. BOTH broke at the welds! ( reported it to Andrew at BUSHTEC - said that they fixed the issue.
Top of the page Bottom of the page
Jim
Posted 2010-03-05 1:59 PM (#54412 - in reply to #33659)
Subject: Re: Bushtec Vision Trailer Announcement from 07KPT at thevmc.com


Cruiser

Posts: 93
Saskatchewan (hard to say, easy to draw )
Sorry all ( and you too Salty!) for the repeat posts - Just back at the site and getting psyched to get the bike out!
3 things learned so far....
use plastic tubing over the lip of the windshield to stop a bit of the rain splatter back into my face
attach an antistatic strip somewhere so that the dust build up on long tips isn't so bad.
JoeFLorida's LED accent lights ( multicolor kit) with 96 leds plus another 2 of the 30's will be going on the bike! http://ledaccentlights.net/store/index.php?main_page=index&cPath=45

I will learn how to use this forum posting stuff yet!
Top of the page Bottom of the page
Crawford
Posted 2010-03-05 2:57 PM (#54418 - in reply to #33659)
Subject: Re: Bushtec Vision Trailer Announcement from 07KPT at thevmc.com


Tourer

Posts: 340
Regina Saskatchewan Canada
All my cross braces on my Bushtec hitch where broken . . . . thought I was buying a quality product . . . especially since I paid a premium price. They did apologize and sent me replacements. Not sure the weld looks any better than it was before.
Top of the page Bottom of the page
Jump to page : 1 2
Now viewing page 2 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™