You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Brake pedal option
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Bluegill
Posted 2010-01-06 11:21 PM (#50888)
Subject: Brake pedal option


Puddle Jumper

Posts: 47
High Ridge, Mo.
Has anyone found a larger brake pedal? That little thing that's on there looks out of proportion compared to the brake arm.
2" on the ground, 3" more coming along with sub-zero temps. I must be bored. At least my beer is 30 degrees. Got the lower air wings and the chrome mirror trim installed, along with the plow on the Sportsman. Next up is the Kuryakyn brake light controller. Maybe tomorow.
Top of the page Bottom of the page
varyder
Posted 2010-01-07 5:26 AM (#50897 - in reply to #50888)
Subject: Re: Brake pedal option


Visionary

Posts: 8144
New Bohemia, VA
I doubt if I'll have anything done anytime soon but I plan on having some fabricated that will accommidate a nice looking kuryakyn replacement pad.
Top of the page Bottom of the page
WillieByte
Posted 2010-01-07 6:33 AM (#50902 - in reply to #50888)
Subject: RE: Brake pedal option


Cruiser

Posts: 104
Plainfield Illinois
Like this?



(Capture_631.jpg)



Attachments
----------------
Attachments Capture_631.jpg (58KB - 1 downloads)
Top of the page Bottom of the page
Gray rider
Posted 2010-01-10 10:05 AM (#51076 - in reply to #50888)
Subject: RE: Brake pedal option


Tourer

Posts: 394
Tucson, AZ
I found the stock pedal too narrow. I had to lift my foot, twist it to the left to brake. I replaced both pedals with the Arlen Ness chrome pegs. They're longer and look better too.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™