You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 11
| i noticed 2 wires on my 09 tp coming from the harness above the battery that had matching connectors but were not connected. I can access from the fron grill.
wires are single, one red and one yellow, both same length about 6 inches long coming from the main harness.
one male and one female
connectors are black, with the male having a small green rubber boot midway up the connector
No other wires are in the area, or have simllar connectors.
1. should these 2 wires be connected to each other ( they do fit)
2. what do these wires do. stqarted the bike and tried to see if I could tell what they were for but could not tell. I have a service manual but I cannot see those wires from the manual
thx |
|
| |
|
Tourer
Posts: 301
Buffalo Grove,Ill | they are there from the factory to hook up a battery tender. |
|
| |
|
Puddle Jumper
Posts: 11
| thanks for responding.
the only problem is that I already have a battery tender connector fron the factory that came with the bike. It has about a 2 ft cord and a typical tender hook up, with a rubber cover and a rubber encased one piece male/female connector.
What I am talking about is 2 wires from the harness with matching but separate connectors, but different than the typical tender type. these are each about one inch in length, with the make connectory having a green boot on it
I dont think that victory would make 2 sets of tender wires.,
please advise,
still confused
|
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | maybe PIAA lights, I don't know.... |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
unidentified flying wires?
