You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 88
Nova Scotia , Canada | Hi there, I just purchased a 2011 crimson Vision to replace my 08, and purchased a set of gatlin tips. This evening when I went to remove the stock tips I discovered that the centre section on the stock tips are welded to the muffler outlet pipe. Has anyone experienced this before and did they grind off the welds to remove the rear section of the stock tips? Has any one else attempted to install gatlin tips on a 2011? Advice welcome
Don
|
|
| |
|
Puddle Jumper
Posts: 14
Dublin, Ohio | Someone else had this problem:
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=5602&pos...
|
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | Gatlin is either a shit kick singer or a town in Tennessee. GATLING as in the hand cranked machine gun I believe is the correct name for the part. |
|
| |
|
Cruiser
Posts: 131
Edmond, OK 2012 Vision, 2012 Cross Country | Yes I did have this same problem with my '11 cut the weld and replace them with the new tips. Works great. Good luck. |
|
| |
|
Cruiser
Posts: 88
Nova Scotia , Canada | Thanks for the info, they will be installed tomorrow
Don |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Gatlin Tips on a 2011 Vision
