You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Vinyl Seat splitting
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Crawford
Posted 2009-07-28 3:37 PM (#40149)
Subject: Vinyl Seat splitting


Tourer

Posts: 340
Regina Saskatchewan Canada
On the driver seat area a seam in the vinyl is splitting out from the thread holes. It isn't very much yet and only from a few stitch holes but I know it will progressively get worse. Has anyone had this problem? My concern is Victory won't cover it under warranty even though I have extended warranty. I know a seat is a normal wear item but really should a seat be deteriorating that soon? My Vision has always been covered or in the garage, very seldom exposed to the weather other than when I am riding.
Top of the page Bottom of the page
jeffmack
Posted 2009-07-28 3:44 PM (#40150 - in reply to #40149)
Subject: Re: Vinyl Seat splitting


Iron Butt

Posts: 623
try a good rubber/vynle conditioner. I treat mine every2-3 months, looks new. mine is also garage kept with 17k miles
Top of the page Bottom of the page
wjoel
Posted 2009-07-28 4:00 PM (#40151 - in reply to #40149)
Subject: RE: Vinyl Seat splitting


Tourer

Posts: 447
Northeastern Penna.
My seat looks brand new at 6300 miles, on my 08. Sorry to hear about yours. It's hard to imagine that this can occur, whether it's vinyl or leather with (normal) use.For what it's worth, I would check with the dealer, for sure, to see if it's covered.
Top of the page Bottom of the page
varyder
Posted 2009-07-28 4:04 PM (#40152 - in reply to #40149)
Subject: RE: Vinyl Seat splitting


Visionary

Posts: 8144
New Bohemia, VA
you might be able to go to a fabric store and get a fix for it before it unravels more, like a discreet button that can be done without undoing the stitching. I don't know, just guessing at what I would do if I was in your shoes.

We've got a JoAnn's Fabric that all kinds of stuff that might work.

It don't take much and I'm guessing you're not the only one.
Top of the page Bottom of the page
Tarpits99
Posted 2009-07-28 4:44 PM (#40155 - in reply to #40149)
Subject: Re: Vinyl Seat splitting


Iron Butt

Posts: 742
North Orange County CA
Crawford:

I have used the type of kit sold here to good effect in the past. These use either solvent "weld" technology or by heating the vinyl compound with an small iron and "graining paper" to fuse the uncured pvc compound into the area needing repair.

I have never used it on a splitting seam so I cant tell you how successful it will be; but if it works it would be significantly cheaper than a re-cover.


http://www.leathermagic.com/Pages/vinrepkits.htm

Good luck.

Fred
Top of the page Bottom of the page
Crawford
Posted 2009-07-28 5:19 PM (#40158 - in reply to #40149)
Subject: RE: Vinyl Seat splitting


Tourer

Posts: 340
Regina Saskatchewan Canada
Here are some pictures of where it is splitting.




(P1140132.jpg)



(P1140133.jpg)



(P1140135.jpg)



Attachments
----------------
Attachments P1140132.jpg (49KB - 0 downloads)
Attachments P1140133.jpg (35KB - 0 downloads)
Attachments P1140135.jpg (44KB - 0 downloads)
Top of the page Bottom of the page
rldr12
Posted 2009-07-28 6:44 PM (#40165 - in reply to #40149)
Subject: RE: Vinyl Seat splitting


Cruiser

Posts: 69
Citrus Heights, CA United States
I have a stock seat with less than 5k on it (changed to corbin at 4800 miles) if you can't fix will sell for $200 plus shipping
Top of the page Bottom of the page
Teach
Posted 2009-07-28 8:17 PM (#40176 - in reply to #40149)
Subject: Re: Vinyl Seat splitting


Visionary

Posts: 1436
Crawford, nope the ext warranty won't cover that, only breakdown stuff. Good excuse to have the seat recovered in leather.....
Top of the page Bottom of the page
Crawford
Posted 2009-07-28 8:30 PM (#40180 - in reply to #40149)
Subject: Re: Vinyl Seat splitting


Tourer

Posts: 340
Regina Saskatchewan Canada
rldr12 is your Vision seat heated? How do you like the Corbin seat? It is about the same price as the replacement Vision seat which I would not get unless I was to get a deal like your's. I would either buy a Corbin or recover with leather. I will keep your offer in mind once I see what's going to happen. I will be spending two weeks in the saddle, I'll see how it holds up.

Edited by Crawford 2009-07-28 8:31 PM
Top of the page Bottom of the page
varyder
Posted 2009-07-28 8:48 PM (#40183 - in reply to #40149)
Subject: Re: Vinyl Seat splitting


Visionary

Posts: 8144
New Bohemia, VA
Crawford you've got many miles and the only one who knows is you. You could buy that other seat while you had yours leathered then I could get from you when done so i could get mine leathered then I could pass it along....
Top of the page Bottom of the page
Crawford
Posted 2009-07-28 9:41 PM (#40194 - in reply to #40183)
Subject: Re: Vinyl Seat splitting


Tourer

Posts: 340
Regina Saskatchewan Canada
varyder - 2009-07-28 7:48 PM

Crawford you've got many miles and the only one who knows is you. You could buy that other seat while you had yours leathered then I could get from you when done so i could get mine leathered then I could pass it along....


Anybody know of a good leather upholsterer in Canada or State side? Good and cheap with emphasizes on GOOD. Looks like it could be the start of a chain of leather re-upholstered Vision seats. Who's turn is it after varyder?

This may be the best way to go and wind up with a far superior seat for the least amount of cash and an opportunity to remove a bit of foam to lower the over all height of the bike. I don't think I would miss an inch of foam in the driver's seat.

Edited by Crawford 2009-07-28 9:44 PM
Top of the page Bottom of the page
varyder
Posted 2009-07-28 9:53 PM (#40196 - in reply to #40149)
Subject: Re: Vinyl Seat splitting


Visionary

Posts: 8144
New Bohemia, VA
The guy I know does a decent job but I hear there is one that is better. Let me check and see what's going on with him. I should find out something this week here in Central Virginia.
Top of the page Bottom of the page
g1nomad
Posted 2009-07-29 12:15 PM (#40229 - in reply to #40149)
Subject: Re: Vinyl Seat splitting


Tourer

Posts: 562
SC, Bluffton
What about Billy Mays Mighty Mend-it?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™