|
|
Cruiser
Posts: 204
guelph ontario | Just came across these wood laminated panels from a california bike shop. Called them up to see whats up-really nice product -they send you the finish of your choice and you install and return your stock panels to them for a credit refund. Cost is very high at $2000.00 (thats not a misprint). Has anyone ordered these and installed them and is it worth the money-do they stand up well to the elements. Note they are a laminated wood finish which is then covered and polished with some type of clear finish. These are very distintive. Check out the links to Cycle Dragon in the links section. |
|
| |
|
Cruiser
Posts: 212
Tavares, Fl | I'm glad you pointed that out. I thought about having them covered with a Cherry woodgrain but now that I see what they look like I changed my mind. Looking for something else now... |
|
| |
|
Tourer
Posts: 377
O'Neill, Nebraska | That's way too much $$'s. RacerShawn does great work with his vinyl graphics (which I believe this wood is too) for $135. $2,000 would buy an incredible custom paint job for a Vision. |
|
| |
|
Cruiser
Posts: 231
Hampton Va | I have lots of wood looks........ |
|
| |
|
Cruiser
Posts: 249
Montreal, QC Canada | Probie, check out my pictures in the Gallery then go to Canadian Tire. |
|
| |
|
Cruiser
Posts: 204
guelph ontario | Kenandpen-saw your photos-looks good on the tank panel but there is no comparison to the product offered by Cycle Dragon. They also do the dash on the faring and the tops of the lever resovoirs on the grips. It may be extravagant but I found some extra cash and will probably order these-check out the web site for Dragon Cysle on the links under Vision kits. |
|
| |
|
Puddle Jumper
Posts: 41
Oviedo, FL | Probie,
I too have been in contact with David at Cycle Dragon reference their woodgrain trim kits. I'm looking at the Birdseye Maple for my midnight cherry street. I like the contrast the colors bring to each other. $1500.00 with the credit.
|
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | WOW...I like a lot of things and I'm usually pretty supportive of changing things on bikes. However...IMHO....these things are kinda fugly. And I really could never justify spending $1500.00 on them. Maybe a couple hundred...at the most. But $1500 would never happen, don't care how much extra $$$ I had. Usually woodgrain can be "complimentry" and very "stylish" but I really don't think the style of the Vision and woodgrain go together at all whatsoever, at least judging by the pictures at cycledragon they sure don't. Maybe it might look ok in person, but until I see this look in person I'm fairly sure I'm going to stay with my fugly opinion. Sorry if my opinion upsets anyone  I strongly suggest having Racershawn show you what he has available. Would cost a lot lot less and probably look the same. And if you run it for a few months and don't like it you simply peel it off and you are back to silver. Or if you like it and you decide you want to go the cycledragon route you have options, sell your set to someone who likes the look, or send your set to cycledragon and have them do thier laminate. But if you go the cycledragon route from the start and you don't like it....good luck  And before anyone asks....no I don't have any connection to Racershawn. I simply suggesting him because he does the work. |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | Just think - for a few thousand - your Vision could look like my pal's Wing:
(Woodywing.jpg)
Attachments
----------------
 Woodywing.jpg (66KB - 1 downloads)
|
|
| |
|
Tourer
Posts: 301
Buffalo Grove,Ill | If you like a 2 wheeled Cris Craft i guess ! |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | Why sure, Dean! Chris Crafts are GREAT! Here is my car dash - courtesy of www.wooddashexperts.com
(Dash- My300.jpg)
Attachments
----------------
Dash- My300.jpg (54KB - 0 downloads)
|
|
| |
|
Iron Butt
Posts: 600
Linwood, MI | There's a guy here in town that has a custom choppper (made by some famous bike guy) that is painted to look like a wood grain. Tank, fenders, the whole bike. It looks so real you have to knock on the tank to find out for sure. It's not something I would like on my bike, but it looks really amazing. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | Hmmmmm, that's it! Leather and Wood, what a Vision. A WoodyVision!
(woodybike.jpg)
Attachments
----------------
woodybike.jpg (36KB - 0 downloads)
|
|
| |
|
Cruiser
Posts: 204
guelph ontario | Lots of interesting options for trims etc. As one person said in the forum-the only persons opinion that counts is the one who holds the pink slip-if you think its fugly-dont look at it. |
|
| |
|
Tourer
Posts: 550
Tacoma, WA | I really don't care for the look on the Vision, but it is nice to know the option is out there. Everyone has differing tastes.-----Metalguy |
|
| |
|
Visionary
Posts: 1308
Sand Rock, AL United States | donetracey - 2009-01-29 11:22 PM
Just think - for a few thousand - your Vision could look like my pal's Wing:
NO THANKS  |
|
| |
|
Iron Butt
Posts: 1158
Richmond, Virginia | my vote FOO GA LAY <---- fugly in french. |
|
| |
|
Cruiser
Posts: 204
guelph ontario | You must be looking in the mirror-ha, ha, ha, ha-did it crack |
|
| |
Wood Trim Dash and Centre Tank Panel
