You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Tourer
Posts: 576
, IA |
Wife's New bike came with accents light's on it. They worked. Had New battery put in ,never ran accent light's until a few days ago.NO LIGHTS. Checked fuse/lost fuse replaced 3amp 250 with a 2 amp 250 - light a no go. Find a wire in front not connect. Set it on positive post. Lights do not work. Ok take the one that's on negative post put it on positive post and place first one on neg.post .great light's. Or so I though. Lights, light but won't turn off. HELPPPPPPP
-----
2014 cct csc trike ,2010 crossbow. |
|
| |
|
Visionary
Posts: 4278
| you shorted out something start tracing |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Is the lights on a switch. If so is the switch on and that's why it wouldn't go off |
|
| |
|
Tourer
Posts: 576
, IA | I wish entertain said blown unit. Oh well |
|
| |
|
Cruiser
Posts: 167
, OH | are they after market lights or the side badge lights, or the dash lights? if they are aftermarket lights there is probably a remote to them. Which means there is a module near the power wires to the lights. If so then the relay is stuck or just needs by passed with a switch. If they are LED lights on a strip then on one end or the other the copper is touching the bike somewhere causing a ground to create power for you.
|
|
| |
|
Tourer
Posts: 576
, IA | Bad switch replaced and lights work Yaaaaaaa!!!! |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Accent,light electrical problem/ uck
