|
|
Cruiser
Posts: 155
Stockton, California |
I am installing some used lowers I bought. Can anyone tell me what is the best stick-on tape to use? I have gotten ALL of the old tape off and need to get the new tape. Just not sure what is the best to use. Also, if anyone has the directions to installing them can you email them to me? rcstrauther@gmail.com Thanks, Roman |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | Do a search for "3M tape". The thread has all the info you need. (Can't cut paste from my tablet) |
|
| |
|
Cruiser
Posts: 155
Stockton, California | nailer - 2013-09-14 3:20 PM Do a search for "3M tape". The thread has all the info you need. (Can't cut paste from my tablet) Found the thread. Thanks |
|
| |
|
Iron Butt
Posts: 752
Broken Arrow, OK | Have these?
(Vision Lowers pg 1 (Medium).jpg)
(Vision Lowers pg 2 (Medium).jpg)
Attachments
----------------
 Vision Lowers pg 1 (Medium).jpg (66KB - 5 downloads)
Vision Lowers pg 2 (Medium).jpg (76KB - 2 downloads)
|
|
| |
|
Visionary
Posts: 4278
| make sure you clean the paint surface good with rubbing alcohol it leaves no residue
|
|
| |
|
Tourer
Posts: 573
Central Illinois | I just did mine today. They have you clean a nice clean bike twice. Starting with the clean bike use glass cleaner on the fairing sections involved and when that dries use an alcohol swab and allow that to dry. They also have you use an alcohol swab on the mounting hardware so that you get adhesion to that side too. |
|
| |
|
Cruiser
Posts: 155
Stockton, California | This is perfect. Thanks for the directions |
|
| |
Installing lowers
