You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 92
Moncks Corner, SC United States | I there a p/n for the grommets (6 ea.) that are installed on my '11 Vision windshield? The ones currently installed are/were probably over torqued on initial install at dealer, and are extruding out from under the screws heads. |
|
| |
|
Iron Butt
Posts: 752
Broken Arrow, OK | WSHR-FL,11X18X1.59MM Part #5813188 $0.44 ea |
|
| |
|
Cruiser
Posts: 92
Moncks Corner, SC United States | Thx. |
|
| |
|
Iron Butt
Posts: 612
| Jimbo62 - 2013-02-28 2:01 PM
I there a p/n for the grommets (6 ea.) that are installed on my '11 Vision windshield?? The ones currently installed are/were probably over torqued on initial install at dealer, and are extruding out from under the screws heads.
That's because they weren't installed correctly, as was the case when I first got my bike. They belong on the underneath side of the windshield between the shield and bracket, not on top of it under the mounting screws. Do not over torque the windshield screws.
I also discovered that the flange bushings that are part of the windshield bracket to motor connection were improperly installed. Once I turned them around, the slop in the windshield all but disappeared.
|
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Windshield gormmets
