You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 43
| could any tell me how to remove the center counsel i took the 2 bolts off that were visible and pull up on it didnt want to break anything want to install top filter |
|
| |
|
Visionary
Posts: 4278
| pull chrome gauge cover might need a flat kitchen knife prey off 2 bolts there open glove box bolt there and the bolts at the end of panel
Take masking tape and label all your wires |
|
| |
|
Puddle Jumper
Posts: 43
| sorry obout that so i will have to take the gauge cluster off first by prying up or out then their is two more bolts under there correct
2012 vv sunset red
|
|
| |
|
Visionary
Posts: 1365
Central Maryland | Hopefully you can see this:
I just got done removing mine; in anticipation of the upper air filter install.
Edited by willtill 2013-03-30 6:26 PM
|
|
| |
|
Puddle Jumper
Posts: 43
| thanks that should help alot the gauge cluster prys up then was the filter worth the money mine is al stock just want a little more off the bottem
2012 vv
3500 miles |
|
| |
|
Visionary
Posts: 4278
| gary1 - 2013-03-30 6:43 PM thanks that should help alot the gauge cluster prys up then was the filter worth the money mine is al stock just want a little more off the bottem 2012 vv 3500 miles Yes the filter is worht it. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
counselremoval
