|
|
Cruiser
Posts: 144
| I have always disliked the peg style for the brakes and decided to give this a shot. I made my own mount for the Kuryakyn pad and it works great its 3/16 thick plate. So much so that I am taking orders for this conversion kit. I will need 6 of you that want them before making them. Heck this can be your x-mas gift to yourself. I include instructions and stainless hardware. $50 plus shipping. I am adding pictures I hope they show
Edited by Dain 2011-12-13 8:18 PM
(15d5f1e55d36a6e58769a2e460b5d37b_500[1].jpg)
(3eb4b01e28a6ced4659a572314535b27_500[1].jpg)
(62d13614a33f4bcbe99fea1526325e14_500[1].jpg)
(8c57b1e0e102f76c1749ec7001145e21_500[1].jpg)
Attachments
----------------
 15d5f1e55d36a6e58769a2e460b5d37b_500[1].jpg (24KB - 0 downloads)
3eb4b01e28a6ced4659a572314535b27_500[1].jpg (21KB - 1 downloads)
62d13614a33f4bcbe99fea1526325e14_500[1].jpg (33KB - 0 downloads)
8c57b1e0e102f76c1749ec7001145e21_500[1].jpg (23KB - 0 downloads)
|
|
| |
|
Cruiser
Posts: 142
elgin mn | i like it i would be interested Pete |
|
| |
|
Visionary
Posts: 4278
| If you do this brake pedal the middle rubber will come off at some point. The double back tape is very poor. I would sagest you scratch the hell out of the chrome and clean it very good and then use a black silicon to hold it in place.
This pedal has been around for twenty years and 9 out of 10 times the middle rubber let's loose and there is no replacement rubber.
The pedal mounted look very nice like it belongs on the bike. |
|
| |
|
Cruiser
Posts: 144
| 2 left any takers |
|
| |
|
Cruiser
Posts: 152
| How much
|
|
| |
|
Cruiser
Posts: 277
Apopka, FL | I have this conversion and love it. Very solid fix.
|
|
| |
|
Cruiser
Posts: 144
| Thanks DrDecay, I just found out that this fits all Victory's with the peg style brake pedal (part #5412493). I am now taking orders for more so if you want them then pm me. Thanks |
|
| |
|
Cruiser
Posts: 88
Billings, MT | Is there a possibility of a matching peg for shifter? |
|
| |
|
Tourer
Posts: 576
, IA | part #5412493). i have a 08 vision and a 08 vegas how do i find out if they have that part# linkage |
|
| |
|
Cruiser
Posts: 144
| Baddog69 I have been asked to make one and will let everyone know if I can do it. Sonic yes its the same peg for both bikes and same part number. |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | I put these on my Kingpin when I bought it in 04 and just added a set to the Vision. Have them on both sides. Look great, no problems.
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd... |
|
| |
|
Visionary
Posts: 1365
Central Maryland | LA Victory Rider - 2011-12-30 5:24 PM
I put these on my Kingpin when I bought it in 04 and just added a set to the Vision. Have them on both sides. Look great, no problems.
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd...
Does it have the HD emblem on it anywhere?
Edited by willtill 2011-12-30 4:33 PM
|
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | NO they do not have any HD info on them.
The only other think I had to buy was the metric round head hex bolts.
Once I had the bolts, they mounted right up.
In my opinion, the match the lines of the bike better than anything else I have seen.
Edited by LA Victory Rider 2011-12-30 4:58 PM
|
|
| |
|
Visionary
Posts: 1365
Central Maryland | LA Victory Rider - 2011-12-30 5:39 PM
NO they do not have any HD info on them.
The only other think I had to buy was the metric round head hex bolts.
Once I had the bolts, they mounted right up.
In my opinion, the match the lines of the bike better than anything else I have seen.
Thanks Bud. I'll order one for the brake pedal. Will be fun telling the Harley dude/dudette that it's for my Victory.... 
HD has a lot of nice chrome accessories; too bad they have to stamp HD all over most of it....
Edited by willtill 2011-12-30 5:13 PM
|
|
| |
|
Cruiser
Posts: 144
| I seen those at the HD shop and they are really really small. Look at mine with the bolt beside it and check out the link its a big dif. My set-up has more area for your foot to contact. |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | You might want to get two. One fro the brake and one for the shifter. They look great on each side.
Yes they do have a lot of nice accessories. I have the matching crash bar set on my King Pin.
We were in there yesterday looking for a HJC helmet for my wife. They didn't have the right size but had the EXACT same helmet with a HD logo. The young dumb bimbo told me that Harley made their own helmets. I had to take a minute and correct her, advising that Harley probably made nothing in the store other than the bikes themselves. She seemed stunned.
willtill - 2011-12-30 2:12 PM
LA Victory Rider - 2011-12-30 5:39 PM
NO they do not have any HD info on them.
The only other think I had to buy was the metric round head hex bolts.
Once I had the bolts, they mounted right up.
In my opinion, the match the lines of the bike better than anything else I have seen.
Thanks Bud. I'll order one for the brake pedal. Will be fun telling the Harley dude/dudette that it's for my Victory....
HD has a lot of nice chrome accessories; too bad they have to stamp HD all over most of it.... |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | To each his own, and I hope you sell lots of yours.
My size 11's have never not found either the brake or the shifter in 7 years. They are plenty big and look great with-out having to do any modifications.
Dain - 2011-12-30 2:34 PM
I seen those at the HD shop and they are really really small. Look at mine with the bolt beside it and check out the link its a big dif. My set-up has more area for your foot to contact. |
|
| |
|
Cruiser
Posts: 144
| No mods with my set-up just bolt it on, and comes with complete instructions and the right grade of bolt also. And I want to thank you for adding this to my thread that I started for parts I am selling. |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | No problem. Looks like a great set up you have. |
|
| |
|
Puddle Jumper
Posts: 48
East Tennessee | Can you do one for $50.00 shipped ? |
|
| |
|
Visionary
Posts: 4278
| Would be a nice touch for heel toe shifter. |
|
| |
|
Cruiser
Posts: 59
| Dain, what is the link to the parts you are selling? |
|
| |
New brake pedal for Vision
