You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Vision audio version 2.5
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Kelvininin
Posted 2012-05-17 10:35 PM (#114513)
Subject: Vision audio version 2.5


Cruiser

Posts: 188
I finally finished the arc amp install.

This ended up being s bigger job than I originally thought. I installed the amp in the truck per the pictures below. This job required the trunk to be completely dissembled. I routed the wires through the powerlet whole in between the trunk shell and tub. Wanting to keep the powerlet I relocated it to the finger whole in the trunk stem panel, its viable from the pictures below.

I chose this location for the amp because it took up as little space as possible and still allows two full face helmets to be placed in the trunk.

Wall wire terminations and tie in are now soldered, in stalled wire harness on all the wires to allow the trunk to be removed, in addition i used wire harnesses that would allow the front speakers to be powered by the vision radio with the trunk removed.

The Arc amp replaced my Rockford Fosgate amp and completely wipes its ass with the RF amp. The Rockford Amp was a night and day difference over the Alpine, the Arc is a night and day difference over the RF amp.

I wanted to keep the trunk organizer so I mounted it on the front wall with velcrow.



(Arc Amp install 2.jpg)



(Arc Amp install.jpg)



Attachments
----------------
Attachments Arc Amp install 2.jpg (58KB - 1 downloads)
Attachments Arc Amp install.jpg (61KB - 1 downloads)
Top of the page Bottom of the page
radioteacher
Posted 2012-05-18 10:40 AM (#114544 - in reply to #114513)
Subject: Re: Vision audio version 2.5


Visionary

Posts: 3006
San Antonio, TX
Looks nice! Very clean!

What are the specs for the amp?

Ride Safe
Top of the page Bottom of the page
okie vision
Posted 2012-05-18 11:06 AM (#114546 - in reply to #114513)
Subject: Re: Vision audio version 2.5


Iron Butt

Posts: 752
Broken Arrow, OK
You are out of control!!! LOL
I can only imagine the sound. Very nice.
Approaching our first year of Vision ownership, the radio has always been an afterthought on our rides. We're modular helmet wearers with Scala comm sets so conversation usually dominates our rides...........BUT, recently I've gotten her to quit talking long enough to listen to some tunes while riding.
I have to admit, a quality system would sure add to the pleasure of this bike. Can't hardly stand the stock stuff but it works ok as long as we're going slow enough.
Great job and thanks for taking the time to do this. Should I decide to, you already went through the trial and error process and made my amp decision easier. Appreciate it!! Hope it works well closed up in that trunk.
Top of the page Bottom of the page
baadawg
Posted 2012-05-18 11:24 AM (#114547 - in reply to #114513)
Subject: Re: Vision audio version 2.5


Tourer

Posts: 499
Chattanooga, TN
Looks good, but I still can't hear it here in north Georgia. Could you please TURN IT UP? By the way, I am out of toilet paper and am in need. I'll give you $100 for your old RF and be pretty happy w with it. PM me if your interested.
Top of the page Bottom of the page
orlean1
Posted 2012-05-18 12:06 PM (#114554 - in reply to #114513)
Subject: Re: Vision audio version 2.5


Puddle Jumper

Posts: 13
Hi Kelvinin
Nice Job. Are you still able to put 2 full size helmets in the trunk with the amp?
Top of the page Bottom of the page
Kelvininin
Posted 2012-05-18 1:46 PM (#114562 - in reply to #114554)
Subject: Re: Vision audio version 2.5


Cruiser

Posts: 188
orlean1 - 2012-05-18 10:06 AM

Hi Kelvinin
Nice Job. Are you still able to put 2 full size helmets in the trunk with the amp?


Yup
Top of the page Bottom of the page
baadawg
Posted 2012-05-18 3:38 PM (#114564 - in reply to #114513)
Subject: Re: Vision audio version 2.5


Tourer

Posts: 499
Chattanooga, TN
Is that the Arc mini or another amp? Which speakers did you use?
Top of the page Bottom of the page
Kelvininin
Posted 2012-05-18 8:46 PM (#114579 - in reply to #114564)
Subject: Re: Vision audio version 2.5


Cruiser

Posts: 188
Arc Amp mini KS124.4 with Kicker PS5250 speakers.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™