|
|
Newnan, Ga | I've seen pics of clear front turn signal lens on a Vision and really like the look. Anybody know who sells them? I've looked the net over and can't find them anywhere. |
|
| |
|
Cruiser
Posts: 181
Henlow, Bedfordshire, England | They are for the European spec bikes, we have clear rear V lenses as well. Sure you must be able to get them there somewhere
http://www.Vision-riders.com/bb/forums/thread-view.asp?tid=6866&pos...
Edited by uknessie 2011-07-09 1:35 AM
(front1.jpg)
(yoda1.jpg)
Attachments
----------------
 front1.jpg (80KB - 8 downloads)
yoda1.jpg (94KB - 5 downloads)
|
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | I got mine thru Volusia Motorsports in Florida, but any dealer should be able to get them. They may have to look in the european catalog.
(2011-06-25 13.12.41.jpg)
(Night Vision.jpg)
Attachments
----------------
2011-06-25 13.12.41.jpg (82KB - 8 downloads)
Night Vision.jpg (24KB - 11 downloads)
|
|
| |
|
Cruiser
Posts: 131
Edmond, OK 2012 Vision, 2012 Cross Country | You can get them at your local dealer ask for the international ones for your bike. That is what I did when I got mine. Good luck. |
|
| |
|
Cruiser
Posts: 188
Tifton, GA | Nozzledog what bulb are you using in your's? |
|
| |
|
Visionary
Posts: 1359
New Bohemia, Va | The lights about makes it looks like an owl. - now there's a bike name "Night Owl" Or better yet "Knight Owl"...
I like the looks, but what is the legality here in the US, and the turn bulbs would have to be amber, I think. What say the experts? |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | US DOT states that forward facing lights can be either amber or white. California follows DOT standards for this.
The LED lights are from Autoluminations.com. The inside ones are a 44 LED 3156 bulb that were short enough to fit thru between the back of the lens and the speaker box. The outer are the 7watt white 3157s. I originally put 60/60 switchback LEDs on the outside (they turn amber when activated) but something in the circuitry was affecting the radio signal when they were blinking, and the color didn't match the inside lights as well. There are other LEDs that are white and blink amber (30 white LEDs and 30 amber on one bulb) that don't have the same issue, but were not quite as bright.
|
|
| |
|
Newnan, Ga | Thanks for all the info. I'll be calling my dealer tomorrow. |
|
| |
|
Cruiser
Posts: 188
Tifton, GA | I have the clear with the 48 LED Switchbacks with the Sequencing Signal Mod at www.Vision-Mod.com. Also have the Sequencing Mod on the rear with the stock lens. They look good and if I can figure out how to attach a short clip.
|
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | I also got my clear front and rears from the good folks at Volusia. My local dealer is clueless on how to get these in. Quick question for our EuroFriends . . . do they sell the running lights on the tour pack in clear? I'd like to get some if they do and put in red LEDs. |
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | How much do these run? |
|
| |
|
Cruiser
Posts: 181
Henlow, Bedfordshire, England | Man314 - 2011-08-19 4:32 AM
I also got my clear front and rears from the good folks at Volusia. My local dealer is clueless on how to get these in. Quick question for our EuroFriends . . . do they sell the running lights on the tour pack in clear? I'd like to get some if they do and put in red LEDs.
As far as I know, no. Haven't seen them before but they would look great with the chrome trims. |
|
| |
|
New user
Posts: 2
| http://www.gearhead.com/
Search part #2411199
#2411198
They sell Victory parts but they don't have a link? (@ least I hope they sell them i just ordered them..)
$160 for both free shipping.
Dealer wants $173 + S&H
>Hope this helps any one else looking.< |
|
| |
|
New user
Posts: 2
| Sorry, Apparently Gearhead they can't sell them?? |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | What the advantage to clear lens when the lights are turned on? |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | Just a different look. I use a white LED in them, so It always looks white. I did not feel the amber looked good with all black and chrome. Some think the bike looks clownish with the amber, I just like the white better.
Edited by Nozzledog 2012-08-04 9:16 PM
(with lights ON.jpg)
(bozo%20bike.JPG)
Attachments
----------------
with lights ON.jpg (98KB - 4 downloads)
bozo%20bike.JPG (46KB - 2 downloads)
|
|
| |
|
Cruiser
Posts: 125
| That is SHARP!
I will do that mod for sure!
There are no power supply issues switching to LED lights? |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | You will need to piggyback a 6 ohm resistor onto each side, super simple. Otherwise the turn signals will blink twice as fast.
(load_equalizer.jpg)
Attachments
----------------
load_equalizer.jpg (9KB - 6 downloads)
|
|
| |
|
Cruiser
Posts: 125
| Thank you! That is cool! |
|
| |
|
Iron Butt
Posts: 612
| Or just use clear bulbs. They work well for me. |
|
| |