|
|
Puddle Jumper
Posts: 28
Newnan Ga | Will a regular Craftsman MC jack work with the CC? Just by getting down and looking I'm not too sure it will? On my Bully the bike sat on the frame while on the jack...the CC I'm not so sure?
Thanks,
Chuck |
|
| |
|
Puddle Jumper
Posts: 8
Eglin AFB, FL | Works just fine. Line the jack up with the kick stand. Start by putting a 2X4 under the kick stand, Because the engine case is not square on the bottom a couple of shims will make it steadier. It also seems to sit on the stand better. I also dropped the bags off. Seems to move the CG forward.
|
|
| |
|
Puddle Jumper
Posts: 32
| Heres a few pictures of my 2012 XCT on the Craftsman jack. Used a 1/4 inch shim on left side rear to steady things better
(IMG_3984 r.jpg)
(IMG_3988r.jpg)
(IMG_3988r.jpg)
(IMG_3985r.jpg)
Attachments
----------------
 IMG_3984 r.jpg (63KB - 0 downloads)
IMG_3988r.jpg (79KB - 1 downloads)
IMG_3988r.jpg (79KB - 0 downloads)
IMG_3985r.jpg (74KB - 0 downloads)
|
|
| |