|
|
Visionary
Posts: 4278
| How many of you would like a baseball cap with the vision logo on it?
Maybe we can talk the guy that makes the patches into do caps.
Voice your wants here.
Edited by john frey 2011-04-10 3:16 PM
|
|
| |
|
Cruiser
Posts: 185
Rhode Island | I'd buy a couple.
Jim |
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | Go for it!! |
|
| |
|
Tourer
Posts: 554
2 mi from Jim Beam n KY | I'm in, provided its a low or medium crown. |
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | Oh yeah, one other thing, make SURE they are available in sizes bigger than Oriental large! I don't know how many times I've had to pass on a cool ball cap because the biggest one they made sat on top my head like a floppy pot holder and would look like I'd borrowed a childs cap. I've got a really big knob hat size 7 5/8ths (24 5/8th diameter). Measure your own casaba and see how big it is. |
|
| |
|
Cruiser
Posts: 132
New York | I'd buy a few!.. Provided they look good!  |
|
| |
|
Puddle Jumper
Posts: 38
Tucson,AZ | +2 |
|
| |
|
Tourer
Posts: 446
East TN | I would buy at least 2 or more if they looked COOL!!!! |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | I was looking for a cool Victory baseball cap but found the ones offered in the Vic catalog a little too flashy. I found the small winged V patch on ebay. This seller is asking $5 for a small winged V. Bought my own cap at a sports store at a local mall. Had my wife sew it on. (cost $5) Now my favorite hat. A small vision logo patch would be cool.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=27055... |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | I was looking for a cool Victory baseball cap but found the ones offered in the Vic catalog a little too flashy. I found the small winged V patch on ebay. This seller is asking $5. Bought my own cap at a sports store at a local mall and had my wife sew the patch on. (total cost $15) Now my favorite hat. A small vision logo patch would be cool.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=27055...
Edited by nailer 2011-04-11 8:06 AM
|
|
| |
|
Iron Butt
Posts: 849
, FL United States | I would get 1 also, if it looked "kewl" :-) |
|
| |
|
Cruiser
Posts: 277
Apopka, FL | I'm down with that! |
|
| |
|
Cruiser
Posts: 154
Danbury, Connecticut | SYNSTR - 2011-04-10 6:55 PM
Oh yeah, one other thing, make SURE they are available in sizes bigger than Oriental large! I don't know how many times I've had to pass on a cool ball cap because the biggest one they made sat on top my head like a floppy pot holder and would look like I'd borrowed a childs cap. I've got a really big knob hat size 7 5/8ths (24 5/8th diameter). Measure your own casaba and see how big it is.
Dude, you must look like the guy from that Megamind movie that was just out. Ain't no way you're gettin a cap on a noggin thats 77 inches in circumference. Oh I'm just funnin' with ya, I know you must have meant 24+5/8 circumference instead of diameter. Damn, I hope that's what you meant ; ) |
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | Yeah, I must have had a brain cramp- thanx |
|
| |
|
Cruiser
Posts: 169
Iowa | Looks like a lot of interest so far. I would like to see what they lookedc like. I could always use a new hat. |
|
| |
|
Visionary
Posts: 4278
| I though if there was enough interest the guy that makes the patches could do hates.
(vision-riders.gif)
Attachments
----------------
 vision-riders.gif (2KB - 0 downloads)
|
|
| |
|
Cruiser
Posts: 238
SF Bay Area | Sounds like a good idea... but if you are talking about the Polaris trademarked Vision logo, wouldn't this be the trademarked property of Polaris Corporation, and require permission to use? |
|
| |
|
Visionary
Posts: 1350
| I know the cost would go through the roof but having the Vision Riders logo embroidered on a hat that matches the color of my bike would look really sharp.
Or just black hat with red logo would look good too. It would even look good on the pin stripe hat that Victory sells that matches my Creek Brothers suit...
|
|
| |
|
Visionary
Posts: 4278
| The guy here at this web site that makes patches I want him to do hates. |
|
| |
|
Cruiser
Posts: 60
| I would like one of these hats if they are made. My vote would be the vision riders logo embroidered on to the hat vs a patch. |
|
| |
|
Visionary
Posts: 1632
Jasper, MO | I would be interested in a couple. I second the votes for low or medium crown. Color matched to our bikes would be cool too, but probably to expensive. I prefer a lighter color for the cap. Black is too hot for comfortable wear in the summer.
Ronnie |
|
| |
|
New user
Posts: 1
| Sign me up! |
|
| |
|
Cruiser
Posts: 238
SF Bay Area | john frey - 2011-04-10 12:15 PM
How many of you would like a baseball cap with the vision logo on it?
Maybe we can talk the guy that makes the patches into do caps.
Voice your wants here.
"Vision logo", or "Vision-Riders logo"?
If you mean the Vision-Riders logo, have you spoken to Jeff or Miles yet (they own the logo).?
Edited by buddahead 2011-04-14 4:29 AM
|
|
| |
|
Cruiser
Posts: 51
Ennis, Tx | I'm in for 2 caps ... nylon caps stay cool and dry out fast... And with the vision emblem with a trunk.. Everything is without the trunk... |
|
| |
|
Tourer
Posts: 492
Indianapolis, IN | I'd buy a couple. |
|
| |