|
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Installing PC V with auto tune and Lloydz intake plate to compliment my CFR exhaust, I'll let you know how much power it makes without a cam when I get back from Daytona............. |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | Looking forward to your report.
Ride Safe |
|
| |
|
Tourer
Posts: 537
, FL United States | +1 |
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | No you won't - if you were planning on Lloyd doing it.
|
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | No I'm doing it here in my own garage............will test it at Wyotec............... |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Dave, how are you doing ?? Going down to Daytona ?? |
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | Cool - Are you installing the Auto-Tune as well?
One of these day I need to get serious about selling my PC-V and Auto tune set up.
With the VFC-III my bike turned 111 Hp and 114 Tq. So I am pretty happy - for the moment.
I am not sure if we are going yet or not... Going to have to wait until we get closer to the date to decide.... If we do we will be heading down on the 10th to Jacksonville to stay with some friends and then on into Daytona on that Friday and back home on Sunday.
|
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Yes Auto tune also............. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Oh yeah, I forgot, I did have to replace those lousy stock exhaust gaskets, it was chirping like a bird..................All good now though.......... |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | PC V w/auto tuning is trimming and after 60 miles bike runs really good with the Lloyds intake plate and CFR exhaust, popping is almost all gone ant the new exhaust gaskets fixed the " chirping" plus to it will rev to 6000 and pulls pretty hard to 5800......... Wyotec dyno will tell the rest of the story................ |
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | Looking forward to hearing the results.
|
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | I'll post as soon as I get back from Daytona............ |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Update from Jones Mill Rd dyno, I figure with the PC V w AT, the Lloyds IP and CFR exhaust it's making about 88-90 HP, I just tried to pull redline in 5th gear and it would not. It was somewhere around 5300 rpm and maybe 125 mph. The big advantage in the lower gears is it'll rev to 6000 and the next upshift is fat in the power band. If Lloyd can do it in an 5 hour time frame I may have the VM-1 cams installed at Daytona, so a before and after trip to Wyotec may be in order...................
Edited by XRsteve 2011-02-20 11:12 AM
|
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | In case you didn't get it, Jones Mill Rd is not a Dyno Jet 150, it's a long straight away near my house......hahaha.............. |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | XRsteve - 2011-02-20 2:59 PM
In case you didn't get it, Jones Mill Rd is not a Dyno Jet 150, it's a long straight away near my house......hahaha..............
Remember to lower your windshield and get under the slipstream to reduce wind drag on this type of dyno.
I was up to 117 and noticed that the windshield was up a bit....a press of a switch sure did change things. It de-compressed the front shocks about 3/4".
Oh yea...Ride Safe!
Edited by radioteacher 2011-02-20 7:15 PM
|
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Heard that Radioteacher, absolutely correct................. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | OK back from Daytona, unfortunately the Wyotec dyno was not open on monday morning so I did not get a before reading on the Vision. After cams and tuning by Lloyd the Vision made 115.5 HP and 117.2 ft lbs. Tuesday I went back to Wyotec and ran it on their dyno and it made 113.55 HP in about 20F hotter weather. When I left I was #1 in the 99.1 to 123.1 cubic inch domestic class, probably won't hold, but I was in first place for a while.......... |
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | Good numbers. I had Lloyd run mine... 118.9 HP and 116.7 TQ.
You my have been gone by the last weekend... Did you see Lloyd Gray Vision there... Ran an 11.6 at the strip on Friday night...
|
|
| |
|
Puddle Jumper
Posts: 28
| Webhair - 2011-03-21 10:03 AM
Good numbers. I had Lloyd run mine... 118.9 HP and 116.7 TQ.
You my have been gone by the last weekend... Did you see Lloyd Gray Vision there... Ran an 11.6 at the strip on Friday night...
I have heard it was 11.6 at 112 on a stock exhaust system. |
|
| |
|
Puddle Jumper
Posts: 28
| Webhair - 2011-03-21 10:03 AM
Good numbers. I had Lloyd run mine... 118.9 HP and 116.7 TQ.
You my have been gone by the last weekend... Did you see Lloyd Gray Vision there... Ran an 11.6 at the strip on Friday night...
I have heard it was 11.6 at 112 on a stock exhaust system. |
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | It was on the stock exhaust. |
|
| |
Power upgrades