|
|
Puddle Jumper
Posts: 28
Mesa, AZ United States | I just posted the previous questions regarding an 08 VV intercom. Just figured out what the wire with the small cannon plug is. Aux input (MP3), I think. Question is, what does that wire plug into in order to plug in an MP3 player. I cannot find any part number or picture of a part that hooks to that wire. Any help here please. Thanks. | |
| | |
Visionary
Posts: 3006
San Antonio, TX | Bruce,
Please check out the document at the link below.
http://hamelmer.com/Docs/VictoryVision_iPodNotes.pdf
Here is an excerpt of the document.
What can you do with the stock jack?
The stock 1/8 inch stereo jack, located in the glove box area to the left of the console, can be used with any small music player that does not have a hard drive.
Just plug in your music player into the stock jack and hit play on the music player then set the radio to the AUX source and you will hear the music. You cannot change tracks, playlists or pause the player from the Vision control cubes.
You would have to use the controls on the music player to change tracks, playlists or to pause the music. You can still use the lower control cube on the left side to change the Volume and change the source for the radio from AM, FM, Weather and AUX.
You can also Mute the audio. to change tracks, playlists or to pause the music.
If you want to change tracks, playlists or pause the music from the lower control cube on the left side, you will need two things, an iPod cable for the Vision and an iPod. Not just any iPod will work please read .......................
Ride Safe
Edited by radioteacher 2011-01-05 11:08 AM
| |
| | |
Visionary
Posts: 4278
| Maybe this is the plug
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=7779&pos...
Edited by john frey 2011-01-05 1:57 PM
| |
| |
|
Aux cable/mp3