Carbon Fiber Junkie

johnnyvision Posted 2011-01-02 1:31 PM (#76486) Subject: Carbon Fiber Junkie Visionary Posts: 4278 I saw other do this CF and liked it and its cheap compared to painting. Its easy to do and with the temp at 10 and 33 inches of snow it gives me something to do. The warmer you have the CF the easier it apple's. If you do it give your self a good inch of over hang to fold around the part and cut the extra material every 1/2" to fold over the edges. I even did the face of my cell phone. http://store.carbonfibergear.com/3m-di-noc-carbon-fiber-vinyl# I bought the 12x48 for $36 and that's with shipping. I am going to do the silver bumper and the aluminum cowling up front. Maybe I'll stop there??? Edited by john frey 2011-01-02 1:42 PM (IMG_0056.JPG) (IMG_0057.JPG) (IMG_0058.JPG) (IMG_0060.JPG) (IMG_0062.JPG) Attachments ---------------- IMG_0056.JPG (44KB - 4 downloads) IMG_0057.JPG (49KB - 3 downloads) IMG_0058.JPG (42KB - 2 downloads) IMG_0060.JPG (43KB - 3 downloads) IMG_0062.JPG (40KB - 2 downloads) Man314 Posted 2011-01-02 3:00 PM (#76488 - in reply to #76486) Subject: Re: Carbon Fiber Junkie Tourer Posts: 575 Spirit Lake IA "Birthplace of Victory Motorcycles" Nice! I've been a long time CF fan. I did my console, front "v" on fairing and the silver aluminum panels just under the seat. Never would have thought about doin inside speedo rings. Good job! joe schmoe Posted 2011-01-03 6:52 AM (#76535 - in reply to #76486) Subject: Re: Carbon Fiber Junkie Tourer Posts: 446 East TN Yeah I like the inside edge of the speedometer too!!! Very nicely done!!