|
|
Cruiser
Posts: 102
Orlando | I have a Garmin 450 (same as 550 w/o bluetooth) which I will be moving from my BMW to my Vision. I had my 450 wired to my Autocom Intercom system so I could listen to directions in my helmet.
My Vision has the CB/Intercom system installed. Has anybody done to the Vision, what I had done to the BMW?
If so, please advise how to hook-up.
Thanks! |
|
| |
|
Cruiser
Posts: 162
Northern NJ | I tapped into the aux wire in the glove box and ran a wire to the Garmin mount so the directions come through the speakers. |
|
| |
|
Cruiser
Posts: 102
Orlando | K2V2 - 2010-11-24 8:52 AM I tapped into the aux wire in the glove box and ran a wire to the Garmin mount so the directions come through the speakers.
So, with that hook-up you must either have music or GPS through the speakers? I was wanting a set-up like I had on the BMW. Meaning, music would be playing, music would lower when GPS needed to give directions.
Thanks for the reply. |
|
| |
|
Cruiser
Posts: 51
Edmonton AB, Canada | I believe that if you have the CB installed in the Vision their should be a connector on the audio harness for the GPS audio. It's just a question of wether the connectors match or not. |
|
| |
|
Tourer
Posts: 446
East TN | There is a connector under the console (4 pin) that can mate up the Zumo to the Vision and give you exact same functionality as the Autocom...It requires a little rewiring...It was either here or on the VOG candubrian did an excellent write up on installing the Zumo... |
|
| |
|
Cruiser
Posts: 111
Prairie Dog Heaven, CO | see my reply in the tech forum |
|
| |
Garmin 450/550