|
|
Cruiser
Posts: 111
Prairie Dog Heaven, CO | I need to find the male counterpart to the 2010 GPS connector (shown below). Who makes them and what kind are they? I know who makes the old style connectors (AMP Multilock) but I can't find anything in the catalog that looks like the new style...
I need to match the 2010 wiring harness with the 2009 cable. I would rather not cut the plug off the bike side but replace the connector on the old style GPS cable.
Any help would be appreciated. |
|
| |
|
Cruiser
Posts: 111
Prairie Dog Heaven, CO | this is the bike side (female) connector
(IMG_0355_2.jpg)
Attachments
----------------
 IMG_0355_2.jpg (36KB - 2 downloads)
|
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | They changed connectors AGAIN!! This makes the 3rd or 4th time. ARGGGH! Someone needs to give the Victory Electrical Engineer something better to do. I had to cut my wires and solder on different connectors hooking up my Zumo to my 09 Vision . . . it did save me paying for the $100 + Victory integration kit, but even that was miss matched. |
|
| |
|
Cruiser
Posts: 111
Prairie Dog Heaven, CO | I think this one was changed only once (from the 2009 to 2010 model year). Why? I can only imagine that the Zumo 660 uses more power (=higher current) and the old connector might not have been rated for that (they are small pins). This is the only reason I can come up with as they still use the AMP Multilocks for the Ipod and Aux connectors.
I have the female Multilock on order and will cut off the bike side if I have to - unless someone comes up with a reference for the new connector style and I can find a source for them. |
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | They changed the connector to support the stereo output of the new GPS connection. It was mono on the 2008 and 2009. |
|
| |