|
|
Cruiser
Posts: 135
Yellowknife, NT Canada | I got an email from them yesterday, saying the $400.00 buy for their lights is available to Vision-Riders again untill the end of May..
sales@clearwaterlights.com
Glenn Stasky
President
Clearwater Lights
2546 Mercantile Drive Unit B
Rancho Cordova, CA 95742
916 852-7029
http://www.clearwaterlights.com
I will honor the price of $400 and we will re offer a special for Vision riders through the end of May.
If you can post about your experience with the lights that would be great!
Just give us a call and we can take your order.
Thanks!
Glenn
916 852-7029
So if you missed out, short of funds then, or came along after this all went down (like I did), here is your chance!!
Here was the original thread:
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=4881&sta...
Be Safe..
Edited by whinchey 2010-05-18 9:43 AM
|
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | bump |
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | I talked to Clearwater today. they have bundled a high/lo beam relay now in the package. So the LED lights go to the set level on low beam, but go to full bright on high beam..
They have also connected them to the horn to give high beam flash when the horn is pressed..
I suggested they look at a daytime modulator of the LED lights, so they pulse in the daytime and go solid at night..
Any other ideas you want to share? I will pass them on.. |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | Those are some great features. I have them on my buy list but I have to built the pot of money back up since the tree limb feel on my roof last month.
Ride Safe |
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | Radioteacher I suggest you contact Glenn at Clearwater whe you are ready. He has been very accomodating, and seemed happy to offer this again to Vision-Riders..
Also when I talked with Glen today I found out they have the Nickle color caps available now. They did not do chrome, because these are stronger and are almost identical.
Cheers.. |
|
| |
|
Cruiser
Posts: 162
Northern NJ | I bought mine a few weeks ago at full price. Even without a discount they're worth it. Excellent product. |
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | Got the email, Mine shipped out today... |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | whinchey - 2010-05-19 11:09 PM
Radioteacher I suggest you contact Glenn at Clearwater whe you are ready. He has been very accommodating, and seemed happy to offer this again to Vision-Riders..
Cheers..
It is not Glen I need to worry about....its my wife! I am keeping this Vision a very long time. I am sure that these will be on my Vision some day.
Edited by radioteacher 2010-05-25 9:25 AM
|
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | I hooked mine up on the vision this past weekend. I soldered wire to the diode and used heat shrink and electric grease to close them up and then installed them. One diode to the horn button output, the second to the high beam output. Both connect to the Clearwater relay included with the kit. I mounted the adjustable pot behind the radio controls. So I can leave the lights set at a particular light level. I add a Victory aux light switch to my console so I can turn them on or off. When I hit high beams on the bike the LEDs go full, when I go low beam they drop to the level set by the brightness control. Also when I hit the horn on the bike, the light go high for that same duration..
Nice install. Recommend this product. I have to cut down an allen key to be able to tighten up the lights and adjust them. Be prepared to do the same, there was not enough clearance to use an allen bit and small wrench either. A cut down key was perfect.
Cheers.. |
|
| |
|
Puddle Jumper
Posts: 33
Attleboro, MA | I sent a email off to Clearwater yesterday asking about any deals..... This was there reply
Hi Dennis.,
Yes. the Vision rider group is fun and interesting. We did offer a $400 special that included shipping. I would be willing to extend that to the group again. Please feel free to post the special and contact us directly to order.
Thanks
Glenn Stasky
President
Clearwater Lights
2546 Mercantile Drive Unit B
Rancho Cordova, CA 95742
916 852-7029
www.clearwaterlights.com
**** What a great company.... Game on.... let the orders begin... I will be calling mine in on Tuesday
-----
_
Dennis
2008 Vision Tour Premium Midnight Cherry
1995 KLR 650 |
|
| |
|
Tourer
Posts: 550
Tacoma, WA | So.... this $400.00 deal is still on? I am interested in a set!-----Metalguy |
|
| |
|
Puddle Jumper
Posts: 33
Attleboro, MA | I have a question on the install of these lights.... I plan on putting them on this weekend. I don't know if
I like where they tell you to put the brightness control...
"The recommended location for the light volume control pot is mounted into
fairing on left side Measure in 3/4" forward of glove box door and 3/4" left of inside edge of
faring."
The question is for those of you that have installed these lights... Where did you put the Light Volume Control Knob"
Thanks
Dennis |
|
| |
|
Visionary
Posts: 3204
Memphis | Tarpits99 has a great write-up with photos here: http://www.vision-riders.com/bb/forums/thread-view.asp?tid=4881&posts=89&mid=59929&highlight=clearwater&highlightmode=1&action=search#M59929 (Scroll up to the middle of the page.) I used the same location he did (left handlebar) but mounted it so that the opening for the knob housing faced down. The link shown above has a lot of good info, read the whole thing. Good luck, you're gonna love 'em! |
|
| |
|
Puddle Jumper
Posts: 33
Attleboro, MA | That's great exactly what I was looking for...
Thanks for your help |
|
| |
Clearwater Driving Lights *** Deal***