iac??
sonicbluerider
Posted 2010-05-11 7:32 AM (#59588)
Subject: iac??


Tourer

Posts: 576
, IA
copied from a different victory web site !!! anyone know if there is a post yet?? cannot fine one>> CAUSE I SURE COULD USE THE HELP.>>>>> Swapped a few emails with Lloyd about this the last couple of days. He said, and I must agree, that not everyone is having these problems with it. He has written, what sounds like, a pretty extensive report about this device that will soon appear on the 'Vision-Riders' forum. Hopes are this will enlighten us about how to better adjust it & get the most out of it.

Top of the page Bottom of the page
Arkainzeye
Posted 2010-05-11 7:34 AM (#59589 - in reply to #59588)
Subject: RE: iac??


Visionary

Posts: 3773
Pittsburgh, PA
are you trying to get info on the iac or the IAV? do a search on here for both.. there has been a few threads about it.
Top of the page Bottom of the page
sonicbluerider
Posted 2010-05-11 9:38 AM (#59597 - in reply to #59588)
Subject: Re: iac??


Tourer

Posts: 576
, IA
no i cannot get it to the proper adjustment been trying quite a long time pop pop pop
Top of the page Bottom of the page
varyder
Posted 2010-05-11 9:42 AM (#59598 - in reply to #59588)
Subject: Re: iac??


Visionary

Posts: 8144
New Bohemia, VA
check your exhuast headers and tighten if necessary. I had the pop pop pop and it took replacing the gaskets myself to get rid of it.
Top of the page Bottom of the page
Arkainzeye
Posted 2010-05-11 12:51 PM (#59612 - in reply to #59588)
Subject: Re: iac??


Visionary

Posts: 3773
Pittsburgh, PA
it took me 4-5 adjustments to get it right.. now its great!!!
Top of the page Bottom of the page
sonicbluerider
Posted 2010-05-11 1:42 PM (#59619 - in reply to #59588)
Subject: Re: iac??


Tourer

Posts: 576
, IA
great now tell where to start to start my adjustments started at 2 turns out bike no start got it out to 4 1/2 turns out bike started rpm 1050 no higher turn out 5 1/2 turns 1100 rpm 950 after warm up and pop pop pop
Top of the page Bottom of the page
#57
Posted 2010-05-11 3:52 PM (#59633 - in reply to #59588)
Subject: Re: iac??


Tourer

Posts: 415
Mine is out about 4 1/2 turns just to get it to idle. Occasionally get some pop, pops.
Usually when it is still cold. Really cold blooded with it.
Idle response is much better, a lot less air being drawn in.
Will have Lloyd look at it later this month.
Top of the page Bottom of the page
Arkainzeye
Posted 2010-05-11 4:15 PM (#59634 - in reply to #59588)
Subject: Re: iac??


Visionary

Posts: 3773
Pittsburgh, PA
i let mine idle right at 1k. according to the tack. but my pcv says im at 1020-1040rpms (when laptop is plugged into pcv)
Top of the page Bottom of the page
sonicbluerider
Posted 2010-05-14 4:52 PM (#59873 - in reply to #59588)
Subject: Re: iac??


Tourer

Posts: 576
, IA
#57 great then tell us all what he told u
Top of the page Bottom of the page
jeffmack
Posted 2010-05-14 5:27 PM (#59875 - in reply to #59588)
Subject: Re: iac??


Iron Butt

Posts: 623
mine is doing well. I have it down to no pops at all between shifts. I only get pops when idleing off from a lot of power (to slow down) or downshifting. any ideas? all exhaust leaks are taken care of
Top of the page Bottom of the page
sonicbluerider
Posted 2010-05-14 9:26 PM (#59898 - in reply to #59588)
Subject: Re: iac??


Tourer

Posts: 576
, IA
whats your secert
Top of the page Bottom of the page
CoolHandLuke
Posted 2010-05-20 2:38 PM (#60263 - in reply to #59588)
Subject: Re: iac??


Iron Butt

Posts: 849
, FL United States
Have an IAV for sale - see Buy&Sell Section
Top of the page Bottom of the page
rwilly
Posted 2010-05-20 4:57 PM (#60271 - in reply to #59588)
Subject: Re: iac??


Tourer

Posts: 523
seattle, wa
PM sent to CollHandLuke
Top of the page Bottom of the page
sonicbluerider
Posted 2010-05-24 8:31 PM (#60651 - in reply to #59588)
Subject: Re: iac??


Tourer

Posts: 576
, IA
even get pop when i disengage the cruise control pop oh pop think i have a new name for my bike>> mister poppy
Top of the page Bottom of the page