|
|
Visionary
Posts: 2300 Georgia, west of Atlanta | does anyone know of replacement winshields ?? Taller, shorter, tinted, curved ect............ |
|
|
|
Puddle Jumper
Posts: 26 North East Oregon | Yeah.... Check these guys out, better than stock, different heights available, tints available and don't forget the headlight guard....... http://www.ceebaileys.com/victory/index.html
Edited by johnedoe 2010-05-09 8:52 AM
|
|
|
|
Cruiser
Posts: 256
| I think I'm going with 7jurock. Had Ceebaileys on my BMW LT and it was nice. |
|
|
|
Puddle Jumper
Posts: 38 Tucson,AZ | +1 on the Ceebaileys . |
|
|
|
Visionary
Posts: 1436
| XR, Victory makes taller shorter and what they call their Blade ws for the vision. I'm running the tall which is suppose to be 2" taller but it is really closer to 1.5".... Disadvantages are that the top edge is at eye level if you are 5' 11"- 6' 1".... On the plus side is it reminds you if you start looking too close, lol. Seriously it works out better for the passenger when it is up so they aren't blown around and for the rider when up for rain. My stock ws cracked around every bolt hole so it didn't cost me anything.
Lots of talk about CeeBailey ws on the board but if I was replacing I'd go with the victory shield again. There are several reasons but one of the big ones is the top edge shape. I'm not a big fan of the egg shaped upper shield shape of the CeeB ws. Just my personal preference. |
|
|
|
Visionary
Posts: 2300 Georgia, west of Atlanta | Thanks everybody.......................steve |
|
|
|
Iron Butt
Posts: 1117 Northeast Ohio | I have the CeeBailey, but like the looks of the Vic windshields better. It's a trade-off, but one I needed to make for my mostly 2-up riding. |
|
|