|
|
Iron Butt
Posts: 935
Rockford, IL | I know a few folks here that are running Lloydz cams are also running a PC V controller. Was wondering (hoping) that somebody might possibly have a map they can email me???
|
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | Anyone??? |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | I know u don't want to hear his. But the auto tuner would be your best bet. It would be a map for someone else's setup. But you own custom map that keeps checking itself. I've read on here where people with the same setups will have different settings on their vfc.. so sharing a map might not give u 100% of the power u paid for... |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | Arkainzeye - 2010-04-23 8:06 AM I know u don't want to hear his. But the auto tuner would be your best bet. It would be a map for someone else's setup. But you own custom map that keeps checking itself. I've read on here where people with the same setups will have different settings on their vfc.. so sharing a map might not give u 100% of the power u paid for... Well....not quite the solution... The AT (which we installed) is not exactly a replacement for a correct PC map. Basically the AT adjusts the parameters of the map that is installed in the PC. If you have a stock map in the PC the AT adjusts the parameters of the stock map. Think of these parameters as limits. The stock map parameters are different than a map for cams or exhaust or intake or whatever.
|
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Power commander told me that AT. adjusts the map u have in ur pc5 +20 to -20 percent. So if u download one of their closest maps it will adjust that map with in 20% of how that map is configured. Then u can save the new configured map and it will adjust that map each time u ride. If u read the instructions of the auto tuner you'll see its pretty impressive. . U can email power commander and ask them. They are very friendly and will email u right back... |
|
| |
Need a Power Commander Map for Lloydz Cams