SOCAL Vision riders
Teach
Posted 2010-04-11 7:37 PM (#57248)
Subject: SOCAL Vision riders


Visionary

Posts: 1436
Hey guys I was over at SuperBraces site looking to order a brace and noticed they still don't have anyone who has taken them up on their request. They are offering a free brace to anyone who is willing to stop by their facility so they can get a couple measurements. Here is their website posting:
"Product ID: 8001
Victory Vision 2008-2010 Details


If you own a this bike or know someone who does and is willing to swing by our Southern CA facility a couple times for measurements, we're looking to give one SuperBrace away for your help. If this you or you know someone who would be interested, please call us at 800-322-4783 or email: info@superbrace.com ASAP for details."
http://www.superbrace.com/products.asp?cat=76

I don't want to start any debates about the necessity of said brace, BUT I would really like to install one on my Vision but am unfortunately on the wrong coast to let them use my bike to get the measurements. So I suppose what I'm saying is the east coast riders are at the mercy of you socal guys to get this item into production for us.
Figure at worst you blow a few minutes and get a free brace you don't want, which you could sell to any one of us who does want it, or you may find as I have on previous bikes that it makes a huge improvement for you and you get it for free.

Long and short is if you can swing a few minutes of your time to see this gets done, I'd be grateful... T


Top of the page Bottom of the page
marcparnes
Posted 2010-04-11 8:44 PM (#57257 - in reply to #57248)
Subject: Re: SOCAL Vision riders


Iron Butt

Posts: 802
I'm in Huntington Beach about 3 miles from their shop. I emailed them that my bike is available. I'll let you know if they call.

Marc
Top of the page Bottom of the page
Tarpits99
Posted 2010-04-11 8:56 PM (#57260 - in reply to #57248)
Subject: Re: SOCAL Vision riders


Iron Butt

Posts: 742
North Orange County CA
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=4161&sta...

I went there satuday morning. They took some measurements but were not particularly hopefull that they could build a brace that would clear the inner fairing and gas tanks. There is very little clearance .
Top of the page Bottom of the page