Lloydz Vision Intake Plate- void warranty ?

hottierod Posted 2010-03-04 10:27 AM (#54315) Subject: Lloydz Vision Intake Plate- void warranty ? Tourer Posts: 348 Sturbridge, Mass Will this plate void warranty ? Anybody have it- feedback ? Thanks Jeff Lotzafun Posted 2010-03-04 12:07 PM (#54324 - in reply to #54315) Subject: Re: Lloydz Vision Intake Plate- void warranty ? Iron Butt Posts: 935 Rockford, IL Well....nothing "voids" a warranty. Take a look at mine and Kevin X posts in this thread. http://www.vision-riders.com/bb/forums/thread-view.asp?tid=5328&sta... It should answer your questions. hottierod Posted 2010-03-04 12:40 PM (#54328 - in reply to #54315) Subject: RE: Lloydz Vision Intake Plate- void warranty ? Tourer Posts: 348 Sturbridge, Mass thxs- it helps answer the warranty question... what air intake plate ? now, any feedback from those that have them installed ? Bubba Posted 2010-03-04 2:41 PM (#54331 - in reply to #54315) Subject: Re: Lloydz Vision Intake Plate- void warranty ? Cruiser Posts: 260 Jeff, Lloyd's stuff is the best. I had Stage one with level 2 pipes. I did not go to Lloyd's air box until I went with the cams and controller. Can't hurt putting it on, don't know what you gain on just the plate alone. What pipes you going with? 1atom12 Posted 2010-03-04 3:25 PM (#54333 - in reply to #54315) Subject: Re: Lloydz Vision Intake Plate- void warranty ? Tourer Posts: 311 Atlanta Area You can get a modest gain with just the intake plate and VFC... Of course the cams take it to a whole new level... #57 Posted 2010-03-04 3:35 PM (#54334 - in reply to #54315) Subject: Re: Lloydz Vision Intake Plate- void warranty ? Tourer Posts: 415 Worked on this in Daytona last year. VFC and intake plate added on average 8HP. Cams added an extra 22HP. rcvision Posted 2010-03-04 3:56 PM (#54336 - in reply to #54315) Subject: Re: Lloydz Vision Intake Plate- void warranty ? Puddle Jumper Posts: 48 Oakdale MN Same result as #57 I have 113 HP/114TQ using the same pipies,cams only I have the Arlen Ness intake plate. Dyno results from 2009 Spirit lake. I wish Lloyd could get pass the rev limiter I was still making power when it hit the limiter. Llyod thinks there is a few more HP on the top and I agree. Arkainzeye Posted 2010-03-04 6:26 PM (#54345 - in reply to #54315) Subject: Re: Lloydz Vision Intake Plate- void warranty ? Visionary Posts: 3773 Pittsburgh, PA im not talking about victory when i tell this short story. but i know someone.. actually someone on HERE, that had his kawasaki denied for a warranty claim to his engine because of a aftermarket intake (thunder mfg.) they claimed it didnt form a good seal and there for allowed dirt to pass which caused the piston rings to wear prematurely.. Now keep in mind many others already have had their rings replaced for the same issue and some of their intakes were bone stock.. It was kawasakis way of getting out of a costly repair.. Kawasaki found their "way out" and took it...