|
|
Cruiser
Posts: 261
Sugar Land, TX (Outside of Houston) | Anyone know the Bolt Size that holds the CB Module in the trunk of the Tour? If you pull the plastic floor panel it's the one on the frame mount I suppose where the CB mounts.
I have a plate to mount in there and rather than buy packages of each to try, I figured one of you might know off the top of your head.
Richard |
|
| |
|
Tourer
Posts: 415
| I am confused, do you mean the bolts that actually hold the CB in?
I took my CB out because I never used it and it made it difficult to remove the trunk.
One side of the CB has just a phillips head screw, the other side has a 1/8" allen which was stripped by the factory and a 7MM socket.
|
|
| |
|
Tourer
Posts: 390
| My auto parts store has a guage hanging by the bolts they have. Take one with you. |
|
| |
|
Cruiser
Posts: 261
Sugar Land, TX (Outside of Houston) | I suppose it would be the Phillips Head screw. It is a small hole that you would month from the top down. I bought a few different sizes to test and will just take the rest back. I am thinking it is an 8 or 10 metric but have not tried them on for size yet. |
|
| |
|
Cruiser
Posts: 261
Sugar Land, TX (Outside of Houston) | Just an FYI - a 10-32 screw fit just right |
|
| |
Bolt Size?