|
|
Visionary
Posts: 2300
Georgia, west of Atlanta | I am new to the site and I'm wanting to find out info on the Vision. I currently ride a 2003 HD Road Glide (44,000 miles) and am thinking of buying a Vision Tour. I'm a bit of a motor person and would like to know is there a stage II kit for the 106 and how much power does it make? Thanks for all info.....steve |
|
| |
|
Iron Butt
Posts: 742
North Orange County CA | XRsteve:
Lots of threads on upgrades but the ultimate is the cam upgrade w/ VFC controller and intake mod performed by Kevin-X. Apparently the best bag for buck going.
http://www.Vision-riders.com/bb/forums/thread-view.asp?tid=4641&pos... |
|
| |
|
Visionary
Posts: 1350
| http://www.quickvic-usa.com/vision.shtml
Great guy and great work. Give Lloyd a call. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Thanks for the info fellas, The 4V SOHC engine is all new to me. It looks to have great potential in the HP department. The intake ports and the valve arrangement really couldn't be any better. I LIKE it....................
Looks like LLoyds really has his act together, 31 HP gain for cams, intake mod and fuel controller with exhaust. 109 RWHP for about $1600.00, man you can't get 109 RWHP out of a Twin Cam HD for anywhere near that money, maybe 85-90 HP. I getting more interested by the hour............
Edited by XRsteve 2009-12-22 5:31 PM
|
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | XRsteve - 2009-12-22 6:23 PM
Thanks for the info fellas, The 4V SOHC engine is all new to me. It looks to have great potential in the HP department. The intake ports and the valve arrangement really couldn't be any better. I LIKE it....................
Looks like LLoyds really has his act together, 31 HP gain for cams, intake mod and fuel controller with exhaust. 109 RWHP for about $1600.00, man you can't get 109 RWHP out of a Twin Cam HD for anywhere near that money, maybe 85-90 HP. I getting more interested by the hour............
The 109HP shown itn the chart was with a Vic S1 exhaust. I fly all around the country, and do "cam parties" for groups of 3-4 bikes. Cost is $1200 complete for 08, and $1800 for 09. All parts included with the exceptionof exhaust. 60+ done at this point!!! |
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | +1 to Lloyd and KevinX. Well worth every penny. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | This is very cool, thanks again............. |
|
| |
|
Cruiser
Posts: 146
| +1+1 on the KevinX Cams, VFC III, Intake Mod.......You Won't Be Disappointed!!!!! |
|
| |
|
Puddle Jumper
Posts: 36
| You already have more h.p. and torque on a stock Vision than a Harley with a 110".
With Lloyds upgrades (Installed by KevinX of course)you will have a significant h.p.
gain, more torque, and the torque continues into the higher r.p.m.'s. As Kevin stated he has installed these upgrades on 60+ Vision's. Good luck finding a un- happy biker, after the upgrades. I certainly don't know any other bike you gain this much for the price.
I would like to wish you all a safe and Merry Christmas. |
|
| |
|
Iron Butt
Posts: 810
| As the others have already mentioned, there are pipes, cams (Lloydz, S&S, Andrews), intake plates (Lloydz and Ness) and fuel controllers (Lloydz, Ness, PowerCommander) out there.S&S has 114" big-jug kit and a variable pressure clutch kit.Lloydz was working on a big-jug kit, but I don't know of its current status.Merry Christmas,Tim |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Thank you all for the info...................... |
|
| |
|
Cruiser
Posts: 203
Rapid City, SD | I hope to do the cams next year when I return from Korea. Even without the cams the Vision has been awesome. I have enjoyed every minute of my Vision. |
|
| |
106 upgrades