loyds cam and intake
snowskier
Posted 2009-08-17 12:25 PM (#41817)
Subject: loyds cam and intake


New user

Posts: 4
i was thinking of doing a cam change with loyds intake and fuel controller, I get very good economy on my 08 vision, will this change in cam,intake and fuel controller give me better economy or worse, ?
Top of the page Bottom of the page
Bubba
Posted 2009-08-17 2:27 PM (#41830 - in reply to #41817)
Subject: Re: loyds cam and intake


Cruiser

Posts: 260
Claim 3-5 better. I have 1100 miles in a couple of days on mine but mostly at 80+ MPH. I also am enjoying my extra HP with my wrist. I will say it did not hurt it. 80 in a big wind I was still getting low 40's.
Top of the page Bottom of the page
kevinx
Posted 2009-08-17 8:35 PM (#41860 - in reply to #41817)
Subject: Re: loyds cam and intake


Visionary

Posts: 1340
Gainesville Fl Home of the Gators		I have done a BUNCH of these upgrades, and EVERY one reports 2-4 MPG increase
Top of the page Bottom of the page
eagle
Posted 2009-08-17 8:55 PM (#41865 - in reply to #41817)
Subject: Re: loyds cam and intake


Cruiser

Posts: 115
Columbus, Ga		09 cams... PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Top of the page Bottom of the page
Prostreet1
Posted 2009-08-17 9:18 PM (#41868 - in reply to #41817)
Subject: RE: loyds cam and intake


Cruiser

Posts: 184
Allen Park, MI		Great results from these upgrades...smoother acceleration, better responsive throttle, just overall improvement. Input from kevinx as well as LLoyd himself is also a big plus!! IMO no better use of funds on your Vision....

Edited by Prostreet1 2009-08-17 9:19 PM
Top of the page Bottom of the page
Webhair
Posted 2009-08-19 8:02 AM (#41973 - in reply to #41865)
Subject: Re: loyds cam and intake


Iron Butt

Posts: 669
Peachtree City, GA		eagle - 2009-08-17 9:55 PM

09 cams... PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

+1
Top of the page Bottom of the page
Bubba
Posted 2009-08-19 10:32 AM (#41979 - in reply to #41817)
Subject: Re: loyds cam and intake


Cruiser

Posts: 260
Mine is an 09 with Cams
Top of the page Bottom of the page
joe schmoe
Posted 2009-08-21 6:01 AM (#42103 - in reply to #41865)
Subject: Re: loyds cam and intake


Tourer

Posts: 446
East TN

eagle - 2009-08-17 9:55 PM 09 cams... PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

+2

Does it reduce or eliminate the backfiring? How do the '09 Respond to the cams and intake plate upgrade? I'm currently running S1 L1 does that matter?

Top of the page Bottom of the page
Bubba
Posted 2009-08-21 7:56 AM (#42109 - in reply to #41817)
Subject: Re: loyds cam and intake


Cruiser

Posts: 260
Some but not all. I also have no Baffles and that End Cap the Dealer in Ct sells, that could cause some. Almost gone on excel have some on decel that could be caused by the pipes.
Top of the page Bottom of the page
raynman
Posted 2009-08-25 9:32 AM (#42346 - in reply to #42103)
Subject: Re: loyds cam and intake


Puddle Jumper

Posts: 37
Kewaskum, WI		joe schmoe - 2009-08-21 5:01 AM

eagle - 2009-08-17 9:55 PM 09 cams... PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

+2

Does it reduce or eliminate the backfiring? How do the '09 Respond to the cams and intake plate upgrade? I'm currently running S1 L1 does that matter?

Definately a HUGE performance improvement, but it will not resolve the popping. My Vision pops much worse post-cams than it did pre-cams.
Top of the page Bottom of the page