|
|
Tourer
Posts: 340 Regina Saskatchewan Canada | On the driver seat area a seam in the vinyl is splitting out from the thread holes. It isn't very much yet and only from a few stitch holes but I know it will progressively get worse. Has anyone had this problem? My concern is Victory won't cover it under warranty even though I have extended warranty. I know a seat is a normal wear item but really should a seat be deteriorating that soon? My Vision has always been covered or in the garage, very seldom exposed to the weather other than when I am riding. |
|
|
|
Iron Butt
Posts: 623
| try a good rubber/vynle conditioner. I treat mine every2-3 months, looks new. mine is also garage kept with 17k miles |
|
|
|
Tourer
Posts: 447 Northeastern Penna. | My seat looks brand new at 6300 miles, on my 08. Sorry to hear about yours. It's hard to imagine that this can occur, whether it's vinyl or leather with (normal) use.For what it's worth, I would check with the dealer, for sure, to see if it's covered. |
|
|
|
Visionary
Posts: 8144 New Bohemia, VA | you might be able to go to a fabric store and get a fix for it before it unravels more, like a discreet button that can be done without undoing the stitching. I don't know, just guessing at what I would do if I was in your shoes.
We've got a JoAnn's Fabric that all kinds of stuff that might work.
It don't take much and I'm guessing you're not the only one. |
|
|
|
Iron Butt
Posts: 742 North Orange County CA | Crawford:
I have used the type of kit sold here to good effect in the past. These use either solvent "weld" technology or by heating the vinyl compound with an small iron and "graining paper" to fuse the uncured pvc compound into the area needing repair.
I have never used it on a splitting seam so I cant tell you how successful it will be; but if it works it would be significantly cheaper than a re-cover.
http://www.leathermagic.com/Pages/vinrepkits.htm
Good luck.
Fred |
|
|
|
Tourer
Posts: 340 Regina Saskatchewan Canada | Here are some pictures of where it is splitting.
(P1140132.jpg)
(P1140133.jpg)
(P1140135.jpg)
Attachments ---------------- P1140132.jpg (49KB - 0 downloads) P1140133.jpg (35KB - 0 downloads) P1140135.jpg (44KB - 0 downloads)
|
|
|
|
Cruiser
Posts: 69 Citrus Heights, CA United States | I have a stock seat with less than 5k on it (changed to corbin at 4800 miles) if you can't fix will sell for $200 plus shipping |
|
|
|
Visionary
Posts: 1436
| Crawford, nope the ext warranty won't cover that, only breakdown stuff. Good excuse to have the seat recovered in leather..... |
|
|
|
Tourer
Posts: 340 Regina Saskatchewan Canada | rldr12 is your Vision seat heated? How do you like the Corbin seat? It is about the same price as the replacement Vision seat which I would not get unless I was to get a deal like your's. I would either buy a Corbin or recover with leather. I will keep your offer in mind once I see what's going to happen. I will be spending two weeks in the saddle, I'll see how it holds up.
Edited by Crawford 2009-07-28 8:31 PM
|
|
|
|
Visionary
Posts: 8144 New Bohemia, VA | Crawford you've got many miles and the only one who knows is you. You could buy that other seat while you had yours leathered then I could get from you when done so i could get mine leathered then I could pass it along.... |
|
|
|
Tourer
Posts: 340 Regina Saskatchewan Canada | varyder - 2009-07-28 7:48 PM
Crawford you've got many miles and the only one who knows is you. You could buy that other seat while you had yours leathered then I could get from you when done so i could get mine leathered then I could pass it along....
Anybody know of a good leather upholsterer in Canada or State side? Good and cheap with emphasizes on GOOD. Looks like it could be the start of a chain of leather re-upholstered Vision seats. Who's turn is it after varyder?
This may be the best way to go and wind up with a far superior seat for the least amount of cash and an opportunity to remove a bit of foam to lower the over all height of the bike. I don't think I would miss an inch of foam in the driver's seat.
Edited by Crawford 2009-07-28 9:44 PM
|
|
|
|
Visionary
Posts: 8144 New Bohemia, VA | The guy I know does a decent job but I hear there is one that is better. Let me check and see what's going on with him. I should find out something this week here in Central Virginia. |
|
|
|
Tourer
Posts: 562 SC, Bluffton | What about Billy Mays Mighty Mend-it? |
|
|