|
|
Visionary
Posts: 3773
Pittsburgh, PA | i have been wanting to ask for a long time now. but i always forget.. If you install a fuel management device. (any brand) and if you HAVE TO disable the o2 sensors, do you loose the Mile per gallon readout on the screen where the gear indicator is? |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | i was also just wondering if you disable the o2 sensors does it ALSO disable that feature on the digital read out where it says, how many miles you have left to your tank of fuel? |
|
| |
|
Tourer
Posts: 374
Tucson, AZ | I had a Power Commander put on mine, the O2 sensors still connected, and all reading still function. I questioned leaving the O2 sensors connected as i always disconnected on my harleys and used the resistor dummy plug on the wires but my dealer said that was the Harley....this is the Vision. So i dont know if it is good or bad, but do know it runs well and fuel mileage has increased about 2 mpg overall.
mike |
|
| |
|
Cruiser
Posts: 68
Cabot Arkansas | No you do not lose the reading it might be off but we all know that it is off from the factory (the reading it displays vs miles per gal). I have installed the Lloyds fuel controller and airfilter i have also seen an increase in fuel mpg on the readout. hope this helps |
|
| |
fuel processor & digital read out (mpg)