I am going nuts already
Bubba
Posted 2009-05-04 5:11 PM (#33794)
Subject: I am going nuts already


Cruiser

Posts: 260
Just had the bike for 3 days. I am a nut about keeping it clean. My jacket must rub on the paint in front of the seat and causes light scratching in the clear coat. What are you doing to eliminate this. Tried a few things to get them out, but afraid to rub too hard. Any advice would be appreciated! Thanks
Top of the page Bottom of the page
Jim Millington
Posted 2009-05-04 5:47 PM (#33797 - in reply to #33794)
Subject: Re: I am going nuts already


Cruiser

Posts: 101
Cold Lake Alberta Canada
I know it sounds gross but I polished the bejeepers out of mine and had a Trim Line design guy put a piece of clear protectant on the area in question. If it starts to look like crap we do it again. So far so good.

Jim
Top of the page Bottom of the page
RedRider
Posted 2009-05-05 4:48 AM (#33832 - in reply to #33794)
Subject: Re: I am going nuts already


Visionary

Posts: 1350
3M makes great products to get the scratches out. Like Jim said you can put a pc of 3M stone guard there.
Some Victory and other jackets have a leather pc that covers the end of the zipper to prevent this.
I only find this to happen if I ride with my jacket unzipped. Having it zipped a few inches saves me the problem.
Top of the page Bottom of the page
kenhiggins
Posted 2009-05-05 5:36 AM (#33833 - in reply to #33794)
Subject: Re: I am going nuts already


Cruiser

Posts: 249
Montreal, QC Canada
If you are in the States, you can get some Liquid Glass at your local auto store. Heard about this from Songfan and hes swears by it. I've seen his bike and it looks great. I have the same scratches and scuffs on mine and will probably get a new panel ($170.00) and use the Liquid Glass Songfan gave me to preserve it. The guys on this site have recommended multiple coats of it.


Edited by kenandpen 2009-05-05 5:37 AM
Top of the page Bottom of the page
Bubba
Posted 2009-05-05 6:33 AM (#33836 - in reply to #33794)
Subject: Re: I am going nuts already


Cruiser

Posts: 260
Thanks for your replys! I did read about the Liquid Glass. I went to auto zone last night. Searched the section they have all the Waxes and cleaners, no LG??? My girl friend says ask the guy at the front desk. I do, and he tells me that they only have 2 left on the discount counter. I read on their site that it costs around 23 dollars, but they are now 9.99!! Was going to buy both, but would have lasted 5 years on the bike. Did the panel in front of the seat last night and it looks really good. The rest of the bike will get done today!! 3 coats??? Will be there all day!!!
Top of the page Bottom of the page
radioteacher
Posted 2009-05-05 5:12 PM (#33879 - in reply to #33794)
Subject: Re: I am going nuts already


Visionary

Posts: 3006
San Antonio, TX
Bubba,

Thanks!

I don't know about you guys but I am going to Autozone on the way home!

Top of the page Bottom of the page