Cruiser
Posts: 212
Tavares, Fl | Yesterday I replaced the front fork seals on my 12 Vision. It was much easier than I expected. I ordered the kit from Witchdoctors and watched their video.. I will attach a photo of the tools I used. The only thing different is the short 6mm allen wrench with 1/4 open ended wrench to loosen the top bolts. To install the new seals I put them in by hand as far as I could, put the old metal washer on top of it then the old seal on top of that. I then used a 3 inch pvc pipe to drive the new seal into place. Victory calls for 550 cc of fluid, so I put in 2 cups of 10 weight fork oil...So far they work great, a little firmer than before which is what I wanted....
(fork seal tools.jpg)
Attachments
----------------
 fork seal tools.jpg (33KB - 4 downloads)
|