|
|
Puddle Jumper
Posts: 35
, IL United States | What parts will I need? 77k on bike
My list is exhaust flange gaskets, belt, rear (ct) tire has 22k, so maybe that too.
Anything else that should be mandatory? |
|
| |
|
Visionary
Posts: 4278
| try to get good answer from dealer when you might see the belt.
I read where polaris/vic is cutting on parts left and right.
make sure you did out the old exhaust gasket to get a good seal. |
|
| |
|
Puddle Jumper
Posts: 35
, IL United States | Some notables,,,
Did not need to loosen header pipes to remove muffler, tipover, sprocket cover, or wheel.
The removal of the belt, while done by time, nature, belt tension, or miles, took out the inner saddle bag, which is now in many pieces.
Note to self. Changing belt before it self destructs is a good plan and much cheaper. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Why would you need exhaust gaskets to replace your belt? |
|
| |
|
Puddle Jumper
Posts: 35
, IL United States | In my search to find steps for belt replacement, some had indicated swinging the head pipes out of the way, presumably to remove sprocket cover. I didn't need to however. |
|
| |
|
Visionary
Posts: 4278
| If the headers ever come off you should replace the gaskets. When you put pipes back on they don't always fit the same. Kinda like a used sock
auto parts store sell the gaskets |
|
| |
|
Cruiser
Posts: 154
Danbury, Connecticut | Sorry to hear about the damage you received from the belt. Do you visually inspect the belt on a regular basis? If so, did it show any warning signs?That's the earliest failure I've heard of for one of those belts except where a pulley was damaged. Based on the damage, I'm guessing it slowly came apart and whipped the plastic saddle bag to death. |
|
| |
|
Puddle Jumper
Posts: 35
, IL United States | repairs made with fiberglass matting.
Not much of a body guy, but I should've done the tire side first then it may have come out flatter. Behind the lid so not many will see it. Needed new meat on the back anyway, so mounted a sumitomo 195/55/16. Repainted the sprocket and brake rotor as they were showing their age.
Edited by eotsis1 2017-06-07 5:16 PM
(vision saddlebag repair 001.jpg)
(vision saddlebag repair 002.jpg)
(vision saddlebag repair 003.jpg)
Attachments
----------------
 vision saddlebag repair 001.jpg (85KB - 1 downloads)
vision saddlebag repair 002.jpg (97KB - 1 downloads)
vision saddlebag repair 003.jpg (86KB - 1 downloads)
|
|
| |
|
Visionary
Posts: 4278
| eotsis1
more air in shock |
|
| |