|
|
Cruiser
Posts: 222
Barefoot Bay, FL United States | Where would I find the exhaust header dimensions (OD, ID) listed for the Vision? I can find the parts listing, but no sizes. 2.125", 2.25", 2.5"??
2008 Vision Tour Chrome IS a color
|
|
| |
|
Visionary
Posts: 4278
| can't you measure yours. Would think the cross country would have the same size pipe along with maybe the steel frame bikes |
|
| |
|
Cruiser
Posts: 170
Barrington, NH | I have one at the shop if you want to swing by an take some measurements. It's already off the bike... |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | My guess and I could be completely wrong. The reason why you don't find sizes for the parts is because it only comes in one size therefore it's unnecessary to mention what size it is because you don't have a choice. |
|
| |
|
Cruiser
Posts: 222
Barefoot Bay, FL United States | Thanks, Carl. Been wanting to install Tailgunners, but the brackets are slotted for HD, and Ma Vic is a stud. Hoping to slide a square nut into the slot on the pipe, then screw in a full threaded bolt and cut off the head to make my own studs. Not sure what size the header is though. The Tailgunners have a few sizes for their tips, and would hope to get close, or use an adapter that 'they' also sell. Mark
Edited by witchbiker 2016-08-01 2:52 PM
|
|
| |
|
Visionary
Posts: 4278
| So what does the header size have to do with the Tailgunner when it bolts into the muffler not the header |
|
| |
Exhaust header pipe