Cycle Dome/Cycle Shell
V spot
Posted 2008-12-17 1:46 PM (#25193)
Subject: Cycle Dome/Cycle Shell


Cruiser

Posts: 123
Marysville Washngton		Has anyone tried one of these products? Will the Vision fit into one?
Top of the page Bottom of the page
Lotzafun
Posted 2008-12-17 2:25 PM (#25195 - in reply to #25193)
Subject: RE: Cycle Dome/Cycle Shell


Iron Butt

Posts: 935
Rockford, IL


Not sure it matters or not......

But are you talking with or without trunk? Keep in mind that with the trunk the Vision is about 2" or so longer.

And I wonder if the windshield hieght would matter? Up versus down, stock shield versus tall shield, etc...

I'm not sure but I don't think I've seen anyone around here post any information on the either the dome or the shell. So you might possibly have to be a guinea pig and find out

Top of the page Bottom of the page
GRZ
Posted 2008-12-17 8:24 PM (#25214 - in reply to #25193)
Subject: Re: Cycle Dome/Cycle Shell


Cruiser

Posts: 64
Ma.		I did call the manufacuturer last year and was told that the Vision would fit inside without any problem.

Hope this helps...

Gary
Top of the page Bottom of the page