|
|
Tourer
Posts: 319
| The Power commander say its for 2009 Vision...Does this mean I cant install it on my 08? Why? |
|
| |
|
Visionary
Posts: 4278
| what power commander #3 or PCV or what
where are you getting it from
you better go to Lloydz or The Vic Shop and buy from them. Have them download a map in it too |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | Probably. But check with the Power Commander site or call their support line. |
|
| |
|
Austin, IN United States | I have a PCV on my 08. Was installed by KMC when I had my cams done |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | It can be installed on a 08 .... how do I know,.. I had a 08 ... and I did it. ... |
|
| |
|
Tourer
Posts: 537
, FL United States | <p>Yes I have an 08. Local dealer said it would not work. I knew there were people on here that had it done. One trip to Southern Motorworx for cams and a switch from the VFCIII to the PCV (in prep for a future 116). It was done completed. I liked the fact that the PCV can tune each cylinder. I would have it dyno tuned for max performance as each bike is different. I also like the Rev limiter. Now I need to send the pc off to Lloydz to get rid of the 120 governor.</p>
Edited by dr_reloader 2016-05-21 9:39 PM
|
|
| |
|
Cruiser
Posts: 251
Mechanicsville, VA United States | PCV for the 09 model will work just fine on a 08 Vision, it's all the same thing..............another thing is the PCV that fits the CC also will work on a Vision, the only difference in the two is the download that is applied from the factory(PC) and all you have to do is download a Vision map. |
|
| |
|
Visionary
Posts: 4278
| http://lloydz.com/store/product_info.php?cPath=45&products_id=48 |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | johnnyvision - 2016-05-22 6:26 PM
http://lloydz.com/store/product_info.php?cPath=45&products_id=48[/Q...
$400 !! You gotta be freaking kidding me .... I got mine for $249 off eBay. ... |
|
| |
|
Cruiser
Posts: 73
San Diego, Ca | Had one on my 08 with auto tune worked great. |
|
| |
|
Puddle Jumper
Posts: 25
| Another 2008 with a PC-V that was installed by Kevin X when he installed my cams. So yes, a PC-V will work on a 2008. |
|
| |
PC-V