Ok...after getting a reply in this thread http://www.vision-riders.com/bb/forums/thread-view.asp?tid=1834&posts=18&start=1 that said Pit Bull didn't recommend using thier lifts on a Vision I decided to do some checking on it. Well...after exchanging a few emails and a phone call with Mark (the owner) at Pit Bull I finally have a few answers as to why Pit Bull currently does not "offically recommend" using thier lifts with a Vision. They have had a Vision in thier facility to test on thier lifts. He said that due to the engine casing seam the Vision does have just a teeny bit of a wobble on thier lift. It is safe to use thier lift for a Vision, but it could be safer though. He said they could very easily make and sell an adapter that would make it a lot more solid and safer. However.....due to Victory not returning ANY phone calls to him so he can simply ask them if there is any issues whatsoever with lifting the Vision using the engine he currently can not truly "officially recommend" that a Vision can be placed on thier lifts. He said that they have sold thier lifts to Vision owners and he has not heard of any problems. He can also say that while it isn't a requirement he does recommend to consider using some type of adapter to make the Vision even more solid on thier lifts. He also says he wishes someone from Victory and/or Polaris would call him back and offically tell him that it is safe to lift a Vision from the engine casing so he can sell lifts with a Vision adapter. So he is basically in a catch-22 He is really hoping to catch a Victory engineer at a show so he can ask them directly on what thier "official position" is. |