Rear Tip over installation

hokieny Posted 2015-09-16 6:33 AM (#174822) Subject: Rear Tip over installation Puddle Jumper Posts: 7 Looking into installing the rear tip overs on my '11 8 Ball. Wondering how deep I got to get into the exhaust/panel removal. Any experiences/pics/advice before I begin? Thanks all varyder Posted 2015-09-16 8:59 AM (#174823 - in reply to #174822) Subject: Re: Rear Tip over installation Visionary Posts: 8144 New Bohemia, VA Heat-shields maybe different to accommodate the tip-over. Other than that, I know of no difference. Same exact bike with the exception of changed parts, like shocks. I'm not even sure if the heat-shields are different, but it would look odd if it had the cutaway for something not there. johnnyvision Posted 2015-09-16 5:31 PM (#174827 - in reply to #174822) Subject: Re: Rear Tip over installation Visionary Posts: 4278 I doubt the heat shields are different. Vic is not that smart johnnyvision Posted 2015-09-16 5:32 PM (#174828 - in reply to #174822) Subject: Re: Rear Tip over installation Visionary Posts: 4278 I doubt the heat shields are different. Vic is not that smart. Beside the pipes are under the tip overs varyder Posted 2015-09-16 7:57 PM (#174840 - in reply to #174822) Subject: Re: Rear Tip over installation Visionary Posts: 8144 New Bohemia, VA I know I have cutaways on mine, and 8-ball pictures don't show the cutaways.