|
|
Puddle Jumper
Posts: 12
Halifax, Nova Scotia, Canada | I am putting together my 11 vision. I bought it damaged and finally have all the parts and they are painted. When I took the trunk apart the wiring harness was routed badly (previous owner painted it white with tan flames and knotty pine).... , the harness was chafed thru in several spots and shorted, speakers are blown. Does any body have pics or details of the proper routing for the harness?
Question 2 is, there is a threaded hole to the left of the oil filter on the rear of the block. What goes in there? When I bought the bike the insurance company had sent it to a dealer for an estimate so they took it all apart and left it, it was all straight just plastic damage on the right side.
Thanks!! |
|
| |
|
Visionary
Posts: 1632
Jasper, MO | On question two, the answer is nothing goes there. It was used to hold the engine on the assembly line and is not used on the finished bike.
Ronnie |
|
| |
|
Puddle Jumper
Posts: 12
Halifax, Nova Scotia, Canada | rdbudd - 2015-07-02 12:18 PM
On question two, the answer is nothing goes there. It was used to hold the engine on the assembly line and is not used on the finished bike.
Ronnie
Excellent, thank you!! I thought it may be for the reverse system, there are no parts left in the boxes so I was hoping I had it all. |
|
| |
|
Cruiser
Posts: 190
| Knotty pine? I love knotty pine myself but usually on the walls inside that cabin I'm going to have someday. To each his own though. |
|
| |
Trunk wiring and empty hole...