|
|
Cruiser
Posts: 79
Louisville, KY | I have over 18000 miles on the bike and after all the mods my clutch is giving up on me.
I have the touring cams, reflashed ecm, top filter and performance front filter, adjustable timing gear, pcV and auto tune, ness big honkers.
Grabbing a handful of throttle gets the clutch squealing in most gears, If I shift in the upper rpms it can be easily felt as it slips awhile before slowly grabbing.
I'm changing over to barnett fibers and steels and the variable pressure plate . Hopefully the clutch will hold up without much change in feel. I called barnett and they were recommending the scorpion clutch but I have heard bad things from a few people so I'm not going that route.
I'll let you guys know how it works out after the switch. | |
| | |
Visionary
Posts: 4278
| start strengthing your grip you'll need it | |
| | |
Cruiser
Posts: 79
Louisville, KY | I guess its a good thing I started working on my forearm strength when I was a teenager. | |
| | |
Visionary
Posts: 3773
Pittsburgh, PA | im not shocked the clutch gave out so soon.. even with your mods... if your ever bored , do a parts Victory parts search and look at who all shares that clutch... that same clutch was used BEFORE the vision even came out... and used on Victory's that way a lot less.. so put the same clutch in a much heavier bike, then if you ride 2 up a lot, or tow a trailer etc etc.... hey, let me take the clutch from a ford focus and out it in the F150.. oh and btw im going to haul some horses as well.... lol | |
| |
|
Clutch upgrade time