|
|
New user
Posts: 4
| Has anyone been able to cut out there lids for the OEM lid speakers? Or do you have to buy the speaker lids as well. I want a good factory look and have no problem doing this my self if it is possible.
http://www.victorymotorcycles.com/en-us/shop/accessories/extreme-sa...
Ok well I see they are just being released if anyone is lloking into this I am interested and will repile if I find anything out. I plan on calling Vic once I am back in the country.
|
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | ok, but where exactly would they go on a vision? |
|
| |
|
Visionary
Posts: 1365
Central Maryland | That's what I was wondering? |
|
| |
|
Visionary
Posts: 4278
| <p>You missed this part</p><p><strong><br /></strong></p><p><strong>A set of Extreme Saddlebag Audio Speakers installed with Extreme Saddlebag Audio Lids</strong> (sold separately) will dramatically increase the audio output Victory? riders enjoy while riding. These marine-grade, weatherproof speakers seal into the saddlebag lids and audio from the lids complements output from fairing-mounted speakers & trunk speakers of models equipped with a trunk so riders are surrounded by powerful, high-quality audio. Upgrade a fairing-equipped motorcycle?s audio system by installing the Cross Country Extreme 6 Speaker Audio Kit (sold separately) in place of the stock fairing speakers.</p>
Edited by johnnyvision 2015-02-22 5:47 PM
|
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | so basically they wouldn't go anywhere on a vision as they are labeled saddle bag speakers.. |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | jechsten - 2015-02-21 9:43 PM
Has anyone been able to cut out there lids for the OEM lid speakers? Or do you have to buy the speaker lids as well. I want a good factory look and have no problem doing this my self if it is possible.
http://www.victorymotorcycles.com/en-us/shop/accessories/extreme-sa...
Ok well I see they are just being released if anyone is lloking into this I am interested and will repile if I find anything out. I plan on calling Vic once I am back in the country.
In other words...XC question on the Vision forum.
|
|
| |
|
Visionary
Posts: 1632
Jasper, MO | nailer - 2015-02-24 1:59 PM
jechsten - 2015-02-21 9:43 PM
Has anyone been able to cut out there lids for the OEM lid speakers? Or do you have to buy the speaker lids as well. I want a good factory look and have no problem doing this my self if it is possible.
http://www.victorymotorcycles.com/en-us/shop/accessories/extreme-sa...
Ok well I see they are just being released if anyone is lloking into this I am interested and will repile if I find anything out. I plan on calling Vic once I am back in the country.
In other words...XC question on the Vision forum.
Gentlemen:
I'm reading this thread in the Victory GENERAL forum, not any of the Vision forums. The OP asked his question in the right place.
I don't know the answer to his question.
Ronnie |
|
| |
|
New user
Posts: 4
| Yeah sorry for the confusion guys I went to the general Victory Forum and threw in XC for the model. And yes I know they are going to sell the lids with the cut out my concern is that if all the are doing is cutting out a hole in the lids then I am pretty capable of doing that myself. With the trim that comes with the speakers I think with a little pre planning you could have a factory look in one afternoon and a six pack. So if anyone knows if there is more to the pre cut lids than a hole I would like to know more about this and would love some pics!! |
|
| |
|
New user
Posts: 1
| Well, Good to know the b!tching got a fast response, even if a useful answer is still pending.. |
|
| |
Victory XC speaker lids