Inner fairing leg (L/R)

Posted 2014-12-31 11:59 AM (#169260)
Subject: Inner fairing leg (L/R)

Cruiser

Posts: 222
Barefoot Bay, FL United States

Hi all,

Has anyone removed the inner fairing legs from their Vision? It's the boomerang shaped covers with the lighted logo (or not) on the 2008's anyway. Trying to get access to the space under the outer fairing legs without pulling them off completely. If I can get the 'inner' legs off, I think I can gain access to the space between the 'outer' legs and the fuel tank. I'm looking to run some LED wiring in there. The Victory web page for "parts diagram" looks like it's just a few screws with clips that attach the inner leg to the outer leg. Chico7z, you here today????

2008 Vision Tour Mid. Cherry. 60k +/-

Any thoughts??

Thanks,

witchbiker

johnnyvision

Posted 2014-12-31 5:45 PM (#169265 - in reply to #169260)
Subject: Re: Inner fairing leg (L/R)

Visionary

Posts: 4278

no easy way just start taking it a part. Pop off chrome dash bezel then the center panel. In side the glove box is small screw hold center panel. Then work your way down. Un bolt front tip overs and behind where they were is two 10mm bolts.
good luck